irmo123
06-17-2005, 07:45 PM
I am trying to turn up a new build but XP doesn't detect my HDD.
mobo: ASUS P5RD1-V Socket T (LGA 775) ATI Radeon XPRESS 200 ATX Intel Motherboard
HDD: Seagate Barracuda 7200.7 SATA NCQ ST380817AS 80GB 7200 RPM Serial ATA150 Hard Drive
My mobo has an SATA controller and ports resident on the board. Do I still need to install the drivers or am I ready to go? I connected my drive to SATA1 with an SATA cable and used the SATA power connector.
I did not include a floppy drive in the build. If the drivers are missing, is there a way to install them with out a floppy drive? During POST the drive appears on the start screen. SATA is enabled in BIOS. I only have one HDD so I was't setting up a RAID array. Any help is appreciated. Thanks.
JB
mobo: ASUS P5RD1-V Socket T (LGA 775) ATI Radeon XPRESS 200 ATX Intel Motherboard
HDD: Seagate Barracuda 7200.7 SATA NCQ ST380817AS 80GB 7200 RPM Serial ATA150 Hard Drive
My mobo has an SATA controller and ports resident on the board. Do I still need to install the drivers or am I ready to go? I connected my drive to SATA1 with an SATA cable and used the SATA power connector.
I did not include a floppy drive in the build. If the drivers are missing, is there a way to install them with out a floppy drive? During POST the drive appears on the start screen. SATA is enabled in BIOS. I only have one HDD so I was't setting up a RAID array. Any help is appreciated. Thanks.
JB