New Build-No Video

[CT2DFW]

Whats up peeps. I have a little problem. I bought some new hardware last night, because my 2 other machines are fried. So i figured I treat myself. Anyways, I bought the Asus K8V-MX, with the Sempron 2800. Im using 2 types of kingston memory, DDR 2700 and I also have some DDR 3200. I havent installed any optical drives and HDD's yet. Well when i boot up the machine the first time, I get no video. Fans spin, green LED pops up, but no video on either of my 3 monitors. I swapped out both memory, and the result is the same. No video. Any help?

[glc]

http://forum.pcmech.com/showthread.php?t=132409

[Kuch]

What type of PSU are you using?

[CT2DFW]

Raidmax 868WSP Scorpio Mid Tower w/ Window 420W - Silver

[glc]

Not the greatest PSU in the world, but it should at least allow a POST unless it's defective. Did you connect the auxiliary 4 pin connector to the motherboard? You need to do the out of the case as indicated in my link.

[CT2DFW]

when i connected the 4pin connector to the board, it wouldnt even boot up. WHen i took it off, it powered right up. I wil ltry the out of case thing tonite.

[kodmaster]

http://www.7volts.com/troubleshooting.htm