WHich cable connects to...

[Aplustech]

Currenty building system.. I'm at that point when everything stops..

So My case has front Audio but the cables dont seem to correspond to the Mobo header Pins.

Mobo header pins are@

P1 - Mic
P2 - GND
P3 - Mic_Bias
P4 - Power
P5 - Front Audio (R)
P6 - Rear Audio ( R)
P7 - Reserved
P8 - No Pin
P9 - Front Audio - (L)
P10 - Rear Audio - (L)


Cable Pin connectors

R - Out
L - Out
RET - R
MIC - PWR
MIC - IN
Ground
RET - R

:confused:


One of you Tech heads must have the knowledge..

Thanks!

Kev:)

[Kov-Ice]

What are your mobo and case models?

[blue60007]

What motherboard and case are we talking about? Not really necessary to answer your question, but maybe someone has experience with that particular combination.

EDIT: Oops, Kov-Ice beat me to it!

[Aplustech]

Mobo - Gigabyte GA-KN8 Ultra - SLi
CAse - Eye-T ATX 6686

:D

[flanzig1]

P1 - Mic = MIC-in
P2 - GND = ground
P3 - Mic_Bias = MIC-Pwr
P4 - Power not used
P5 - Front Audio (R) = is normally labeled: R OUT/R line out/R +
P6 - Rear Audio ( R) = is normally labeled: RET-R/R -
P7 - Reserved
P8 - No Pin
P9 - Front Audio - (L) = is normally labeled: L OUT/L line out/L +
P10 - Rear Audio - (L = is normally labeled: RET-L/L-

[Aplustech]

Thanks for that information FlanZig1

Very helpful. Thanks a milllion!!:D

[flanzig1]

Don't connect the case connectors to that header. On the Gigabyte boards the HD audio option is default. To use the case audio connectors, need to change the HDaudio to AC'97. Check in the MOBO manual on how to do this.

Another person on the Mech is trying the same thing and is causing the mobo to malfunction.