Rossl
04-06-2007, 12:08 AM
My Parts:
1) Intel Core 2 2.13GH w/1066FSB and 2mb Cache
2) Intel D975XBX2
3) 2x 1GB DDR-2 667mhz PC-2 5300 SD-RAM
4) 2x Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive - OEM
5) Antec Solo Black/Silver Steel ATX Mid Tower Computer Case
6) Antec True Power Trio TP3-430 ATX12V 430W Power Supply with Three 12V Rails 100
7) EVGA 256-P2-N443-LX GeForce 7300GT 256MB 64-bit GDDR2 PCI Express x16 Video Card
8)SONY Black 16X DVD+R 8X DVD+RW 8X DVD+R DL 16X DVD-R 6X DVD-RW 5X DVD-RAM 16X DVD-ROM 48X CD-R 24X CD-RW 40X CD-ROM IDE DVD Burner – Retail
I loaded XP, formatted 1 hard drive (didn't install 2nd drive yet, I am NOT planning on using raid). When I reboot I get the following messages:
Press control M to enter Marvell Raid bios configuration
No Array is defined
No HD is detected
Do I need to adjust something in the bios to get rid of these messages?
1) Intel Core 2 2.13GH w/1066FSB and 2mb Cache
2) Intel D975XBX2
3) 2x 1GB DDR-2 667mhz PC-2 5300 SD-RAM
4) 2x Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive - OEM
5) Antec Solo Black/Silver Steel ATX Mid Tower Computer Case
6) Antec True Power Trio TP3-430 ATX12V 430W Power Supply with Three 12V Rails 100
7) EVGA 256-P2-N443-LX GeForce 7300GT 256MB 64-bit GDDR2 PCI Express x16 Video Card
8)SONY Black 16X DVD+R 8X DVD+RW 8X DVD+R DL 16X DVD-R 6X DVD-RW 5X DVD-RAM 16X DVD-ROM 48X CD-R 24X CD-RW 40X CD-ROM IDE DVD Burner – Retail
I loaded XP, formatted 1 hard drive (didn't install 2nd drive yet, I am NOT planning on using raid). When I reboot I get the following messages:
Press control M to enter Marvell Raid bios configuration
No Array is defined
No HD is detected
Do I need to adjust something in the bios to get rid of these messages?