need panel configuration help

[cat_man_2u]

Need help with panel configeration , my Aopen MX36LE-UN Motherboard died, and im replaceing it with a AOpen MX4BS P4 Motherboard, the panel pin :confused: config is diferent, need to know what pins to hook up the PWSW, RS,H.D.D.LED, PWLED,
ANY HELP ?

[Cricket]

need to know what pins to hook up the PWSW, RS,H.D.D.LED, PWLED,PWSW = Power switch or power button
RS = Reset switch or reset button
HDD LED = the hard drive indicator led from the front of the case
PWLED = thte power led from the front of the case

:) Cricket

[cat_man_2u]

Need help with panel configeration , my Aopen MX36LE-UN Motherboard died, and im replaceing it with a AOpen MX4BS P4 Motherboard, the panel pin :confused: config is diferent, need to know what pins to hook up the PWSW, RS,H.D.D.LED, PWLED,
ANY HELP ?The MX4BS motherboard, panel does not indicate the pins and instead of 20 pinswith markings there is only 19 pins and no markings as to what plugs where?

[Alaron]

Page 31 of your manual shows the pin layout. You can download it here if you don't have one: http://www.aopen.nl/download.aspx

[cat_man_2u]

Thanks that fixed my problem, along with the 4 pin extra power for the board that i didn't have hooked up, prob solved thanks guys!