Doom
04-13-2008, 06:27 PM
Okay... so I've been posting here for a couple months about how I wanted to build an SLI machine because I could. Well, I built the machine two weeks ago (fantastic by the way) and went SLI today.
Crysis auto-detected to high settings both pre and post SLI. I was hoping it would auto detect to highest this time. A stress test in Half Life 2: Lost Coast ran 142fps pre SLI and 157fps post SLI. So I did indeed get about a 10% performance boost by that test... but that certainly wasn't worth twice the video card.
My final verdict... do SLI because you can... not because you should. My next build will divert the money from an SLI board and 2x cards into a single card that is the best I can possibly get. Hopefully this will help some folks deciding between the two.
Crysis auto-detected to high settings both pre and post SLI. I was hoping it would auto detect to highest this time. A stress test in Half Life 2: Lost Coast ran 142fps pre SLI and 157fps post SLI. So I did indeed get about a 10% performance boost by that test... but that certainly wasn't worth twice the video card.
My final verdict... do SLI because you can... not because you should. My next build will divert the money from an SLI board and 2x cards into a single card that is the best I can possibly get. Hopefully this will help some folks deciding between the two.