help with new supra 2730

[Attila]

Just got the supra express 56e model 2730. using com2. system is p3 800mhz, sb live mp3 plus,ati all-in-wonder 128 pro.

have att worldnet for provider using their connection mgr v 6.0. This site is rated for V.90. The connect rated is displaying 65555 bps in att connection manager. i have tried the s95=1 but speed still displays at 65555 bps.

I downloaded the current inf drivers from diamond and installed them(correctly i hope).

Why does this still display this? How can i get the highest connect speed correctly? Is there a way to change the extra modem string settings without having to reboot all the time? When i surf each site still takes more time to comeup than I think, is it related to modem settings?

I entered this string in extra settings under control panel/modems/properties/advanced based upon what i have read here on the board and in 56k.com

S202=32S95=1L1+MS=V90,1,,,,48000.

I did try other types of strings including some starting with AT. I did unplug the power to the modem and plug it back int.

here is a copy of my current log:

09-19-2000 06:04:44.62 - SupraExpress 56e V.90 SUP2730 in use.
09-19-2000 06:04:44.63 - Modem type: SupraExpress 56e V.90 SUP2730
09-19-2000 06:04:44.63 - Modem inf path: DIAMON~1.INF
09-19-2000 06:04:44.63 - Modem inf section: InstallVe
09-19-2000 06:04:44.90 - 115200,N,8,1
09-19-2000 06:04:44.90 - 115200,N,8,1
09-19-2000 06:04:44.90 - Initializing modem.
09-19-2000 06:04:44.90 - Send: ATZ<cr>
09-19-2000 06:04:44.90 - Recv: ATZ<cr>
09-19-2000 06:04:44.95 - Recv: <cr><lf>OK<cr><lf>
09-19-2000 06:04:44.95 - Interpreted response: Ok
09-19-2000 06:04:44.95 - Send: AT&FW2E0V1&C1&D2S95=45S0=0<cr>
09-19-2000 06:04:44.95 - Recv: AT&FW2E0V1&C1&D2S95=45S0=0<cr>
09-19-2000 06:04:44.97 - Recv: <cr><lf>OK<cr><lf>
09-19-2000 06:04:44.97 - Interpreted response: Ok
09-19-2000 06:04:44.97 - Send: ATS7=60;S30=0;L3M1+ES=3,0,2;+DS=3;<cr>
09-19-2000 06:04:44.98 - Recv: <cr><lf>OK<cr><lf>
09-19-2000 06:04:44.98 - Interpreted response: Ok
09-19-2000 06:04:44.98 - Send: AT+IFC=2,2;BX4;<cr>
09-19-2000 06:04:44.98 - Recv: <cr><lf>OK<cr><lf>
09-19-2000 06:04:44.98 - Interpreted response: Ok
09-19-2000 06:04:44.98 - Send: ATS202=32S95=1L1+MS=V90,1,,,,48000<cr>
09-19-2000 06:04:44.99 - Recv: <cr><lf>OK<cr><lf>
09-19-2000 06:04:44.99 - Interpreted response: Ok
09-19-2000 06:04:44.99 - Dialing.
09-19-2000 06:04:44.99 - Send: ATDT;<cr>
09-19-2000 06:04:47.97 - Recv: <cr><lf>OK<cr><lf>
09-19-2000 06:04:47.97 - Interpreted response: Ok
09-19-2000 06:04:47.97 - Dialing.
09-19-2000 06:04:47.97 - Send: ATDT#######<cr>
09-19-2000 06:05:07.87 - Recv: <cr><lf>CONNECT 45333<cr><lf>
09-19-2000 06:05:07.87 - Interpreted response: Connect
09-19-2000 06:05:07.87 - Connection established at 45333bps.
09-19-2000 06:05:07.87 - Error-control off or unknown.
09-19-2000 06:05:07.87 - Data compression off or unknown.

any help is appreciated.

[reboot]

Try this: +MS=V90,1,,,,48000S202=32S95=1W2

[Attila]

Thanks reboot for the additional code. I finally found out why the true speed didnot display. Kept reviewing the modem log each time i tried new strings, tried a k56 flex string and it used in a usr mdm3com.inf file(modem log showed that the modem in use was a USR). Usr software still leaves their junk in your directories even when you use their uninstall utility.

[reboot]

Just goes to show what happens when one party assumes too much (me), and the other party doesn't provide all the details (You had a USR).
I assumed you had a PCI winmodem (rockwell/Conexant/PCTel/Motorolla/Ambient) in there, and never considered USR.