PCI Phone Modem...

[Garou]

Hi Im running a Win Me System and I dont know what kind a modem it has installed...is there anyway to Identify it so I can find the drivers for it?

[ur4dr]

system information utillity can help you to identify your modem's chip, it gives you clue to you about kind of your modem

[newme]

i think there is a software called belarc advisor for download that can search for your bios and all our components.heres a link hope it works http://www.belarc.com/free_download.html

[mike breck]

Device Manager>Modem will also give you info about the modem and the current drivers.

[Garou]

This Helps Alot.....Ill try both of the suggestions Thanks! Ill post the results.....

[CorruptedSanitY]

garou,
like they said. Lok under DEVICE MANAGER and then click the little + sign to view ur modem and basically every harware hooked up to ur thing

[Garou]

Originally posted by CorruptedSanitY
garou,
like they said. Lok under DEVICE MANAGER and then click the little + sign to view ur modem and basically every harware hooked up to ur thing
I just Did its a Big Yellow ?
it also says the following
Driver Provider:
Driver Date:
Digital Signer:

Driver file Details is Shaded out and I just Reinstalled Win ME!

[CorruptedSanitY]

a big yellow means alot of things. but one thing it means for sure is u have a problem with it. It can either be a hadrware that was NOT installed properly. Or something conflicted with it causing it to stop working. I would suggest uninstalling it and removin it comepletely. and then installing it again. or right click it and troubleshoot it down.. good luck.

[Garou]

Originally posted by CorruptedSanitY
a big yellow means alot of things. but one thing it means for sure is u have a problem with it. It can either be a hadrware that was NOT installed properly. Or something conflicted with it causing it to stop working. I would suggest uninstalling it and removin it comepletely. and then installing it again. or right click it and troubleshoot it down.. good luck.

The Card works fine it worked good before I formatted the system and added win me I just need to know what kind of card is it and where I may get the drivers, Im also do not have the Driver disk......

[Confused]

Have you tried Belarc Advisor mentioned in a earlier post? It might work even though you have a problem.
Chas

[Garou]

Originally posted by Confused
Have you tried Belarc Advisor mentioned in a earlier post? It might work even though you have a problem.
Chas

Yup and it helped out a Bunch......
This is what it gives me for Comunications:
Microsoft Virtual Private Networking Adapter
Motorola SurfBoard 4100 USB Cable Modem
Network Card MAC Address: 00:20:40:A0:4B:FF
Network IP Address: 66.214.174.129
and I dont see the Modem Card........

[reboot]

You'll have to pull the modem out of the computer, and look for any identifying marks on it. Ideally, an FCC ID# would be best, but even the numbers off the biggest 2 chips on it would help.
Post what you can find here, someone will identify it, and probably find drivers for you.

FYI, Belarc can only identify what's already installed in the computer. If the modem is not installed, Belarc can't help much.
Another case of using 3rd party software to do what windows already does.

[Tuf]

Just take a peek at it and you'll know for sure.

[Garou]

Ok I Pulled it out and I found this
Model: FB WS-5614PSL

and a Sticker Barcode with 9810704557 WS-5614PSL
its a Modem/Soundcard........

I hope this Helps.....

[glc]

Thats a Motorola SM56.

http://e-www.motorola.com/collateral/ME_DFV_PCI_84.41_1OF1.exe

[TwoRails]

Hi Carou,

Try here. (http://www.modem-drivers.com/4044.html)

HTH

TwoRails

[Garou]

Hey Thanks You 2....................But will the drivers work with WIn ME?

[glc]

That *IS* the ME driver I linked to - see the "ME" in the filename?

[Garou]

Originally posted by glc
That *IS* the ME driver I linked to - see the "ME" in the filename?

And it works Thanks To al who helped :D