Bad Credit Mortgages | Credit Report | Personal Loans | Share Prices | Loans
Recommended cooling? [Archive] - PCMech Forums

PDA

View Full Version : Recommended cooling?


KlumpDud
03-14-2003, 01:40 AM
I need a decent CPU HSF. I'm getting an athlon xp 2200 and 512MB RAM PC3200 on an Asus A7N8X mobo. All other stuff is in my sig.

I'm not looking for a fan with flashing lights or one that will sing me lullabies to me. I just want decent cooling.

Any recommendations? Thanks.

Cricket
03-14-2003, 09:51 AM
Thermalright SK-6, SK-7, SLK-800, Speeze CPU Fan Model 5F263B1M3 or Vantec Aeroflow Cooler.

:) Cricket

glc
03-14-2003, 09:52 AM
Or get the retail "processor in a box" and get the 3 year warranty that it comes with.

morriswindgate
03-14-2003, 09:57 AM
I like the Speeze CPU Fan Model 5F263B1M3. Not only is it cheap (14 bucks including shipping on newegg) it also uses an 80mm fan so it is quiet. Really a great performing cooler at a low price and if you need more noise you have a very large selection of cheap 80mm fans that you can rplace the one on it with.

blackhawk
03-14-2003, 05:33 PM
I have that speeze cooler and it didn't give me very good cooling at all. The chepo one that I had with a 60mm fan worked better. I know there is a problem there somewhere, can anyone tell me what it is???? Thanks

Cricket
03-14-2003, 05:47 PM
What kind of temps are you seeing and where are you getting the temp readings from? BIOS or a Windows temp monitor utility?

Did you use that same exact model Speeze heatsink I posted?

:) Cricket

blackhawk
03-14-2003, 05:59 PM
Yes! The exact same model. I think it is a whisper rock something or other. The temps form my motherboard are 108 degrees F idle and the same with the exception of 1 degree higher under load. I only have a 1700+ palamino and I don't like it running that hot. I have a really big chieftec Dragon gamers case with a thermaltake dual fan PSU. Any suggestions? Thanks

KlumpDud
03-15-2003, 12:32 AM
ok, 2 reports of that and I'm crossing the Speeze off the list.

What about the others? Does anyone have experience with the Thermalright SK-6, SK-7, SLK-800, or Vantec Aeroflow Cooler?

glc
03-15-2003, 03:05 AM
108F is only 42C - that's an excellent temperature - what's the problem?

KlumpDud
03-15-2003, 04:10 PM
Don't ask me...I'm the one who asked for advice on cooling in the first place.

Could you give me a rough price estimate for those fans you mentioned? I would make it so much easier for me to find them...

Cricket
03-16-2003, 11:10 AM
Originally posted by KlumpDud
Could you give me a rough price estimate for those fans you mentioned? I would make it so much easier for me to find them... Thermalright Coolers (http://2cooltek.safeshopper.com/34/cat34.htm?931)

Vantec Coolers (http://2cooltek.safeshopper.com/36/cat36.htm?931)

:) Cricket

velker
03-16-2003, 08:08 PM
i like the slk 800, great cooling, dunno about eh speeze, never used it, seems so cheap to me to be a great cooler compared to the heavy slk800. just put a quiet fan on the 800 and ur set to go, the sk-7 and 6 are good to but not as good as big bro 800 =D

KlumpDud
03-17-2003, 02:37 AM
Thanks everyone. I went with the Vantec Aeroflow Cooler. I'll let you know how it turns out once it arrives

KlumpDud
03-17-2003, 04:04 PM
Do I need to rub thermal compound into the heatsink when I first get it? I did that on my Cooler Master for my last one...

Spyda
03-17-2003, 04:22 PM
thats what it says in the AS instructions, rub it in every direction to fill the microscopic valleys