View Full Version : Linksys BESFSR41 question
crjdriver
08-05-2003, 05:24 PM
I will need to connect 4 devices to my dsl connection. My question is does the Linksys BESFSR41 have 4 ports to connect computers to plus the wan port for dsl or is it one wan plus 3 for a total of 4? I looked at the product link and from what I could tell it is 4 plus 1.
Thanks
Chuck
sdkfz
08-05-2003, 05:40 PM
I just bought one of these today (by mistake too - it was AOL that was killing the network with Roadrunner not a bad router) anyway you get 4+1+1
4 pc's hooked up to one input and a uplink so if you need to add another router you get a 6 inch cable and start stacking. That is why they say the limit is 253 users!
crjdriver
08-05-2003, 05:43 PM
Thanks, I will order it today.
If you use the uplink port, you cannot use port #4, so it's 4 computers OR 3 computers plus an uplink to another switch.
sdkfz
08-06-2003, 12:15 PM
I checked the documentation and glc is (of course) right, if the port 1 is in use then the uplink port will not work as they have shared wiring.
Still, you can hook 4 pc's up to share
Only when you need more than four will you be forced to add another unit, remove port one and uplink so at that pont assuming you add a 4 port hub you have 7 total connected PC's
crjdriver
08-06-2003, 12:28 PM
Thanks guys. I ordered it yesterday. I will install it when I returm from my four day trip.
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.