MPAA | Bad Credit Mortgages | Record Internet Radio with Tags | Credit Cards | Online Loans
help 9800np -> 9800pro [Archive] - PCMech Forums

PDA

View Full Version : help 9800np -> 9800pro


afoctober2
09-22-2003, 10:56 PM
I tried to flash my 9800 to a pro but when I put in the boot disk it says ms dos starting but it never starts. I have xp pro

This is where I got bootdisk from.
http://www.bootdisk.com/

Jester
09-22-2003, 11:05 PM
so your saying you can take a 9800 np and make it a pro please tell me more cause this would save me some money

afoctober2
09-22-2003, 11:10 PM
This site explains it all you have to do is flash the bios to a 9800pro.

http://discuss.futuremark.com/forum/showflat.pl?Cat=&Board=techdisplayadapters&Number=2712704&page=0&view=collapsed&sb=5&o=93&fpart=1

http://www.amdforums.com/showthread.php?s=&threadid=251451

But its not working for me so far but hopefull it will get figured out.

glc
09-23-2003, 10:51 AM
Make your own bootdisk.

Creating an XP Startup disk for booting to MS-DOS

(The MS-DOS startup disk you create will allow you to boot to
MS-DOS but contains no additional tools.)

Insert a floppy disk into your computer's floppy drive. All
of the information on the disk, if any, will be erased.

Go to "My Computer".

Right click on the A Drive and then click on Format.

Under Format options, click "Create an MS-DOS Start-up Disk".

Click Start. and the DOS Start-up Disk will be created.

afoctober2
09-23-2003, 12:18 PM
It seems to be my computer I took out the my 9800 put it in another computer then booted froms the ms-dos disk and I flashed bios with no problem.

afoctober2
09-23-2003, 02:40 PM
with the bios flash my 3dmark2003 score went from 5004 to 5572