Sound Activated Cathode Help

[enuex]

I recently ordered a sound activated cathode light from ebuyer.com. No experience of case modding outside lighted fans/PSUs, but having built PCs before, I figured I'd work out what to do. The product can be seen here:

http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=44633

When I opened my package I had a set of 5 tubes, each with a 3-pin plug. No instructions or anything, just a set of 5 tubes. Having tried fitting one of the plugs onto the board (only went onto a fan port), I tested it and got nothing. Having read the reviews, people talk about 4-pin sockets, power inverters supplied, and a sound reactor module... have I been sent the wrong product? I have 5 tubes, and these inverters and modules (one review mentioned settings on it, switches etc) nowhere to be seen...

Have buyer messed up on me? Or is there something I don't know?

Thanks

[FLG]

Hmm 5 tubes? did you order 5 of them or did it come with 5? should come with one cathode and an inverter, the cathide simply plugs into the inverter via the 3 pin plug, then the inveter plugs into a 4 pin molex connector via a 2 pin plug that goes to a 4 pin molex conntector, then you adjust the sound module to how much sensitivity you want it to be and your done.

[nocturnx]

Sounds like they sent you the wrong thing. Should be one cathode tupe and a sorta small black box with switch on it and some wires.

[enuex]

Thanks all, going to return them. Yes it was 5 tubes for each cathode, thought that was odd :S

[Fastfly]

if they sent you 5 complete cathodes you might of got a deal :)