about nero express OEM

[lostplanet]

i have recently purchased a new CD/rw and got nero express OEM with the deal
it works fine copying cd to cd, but will not end a session when burning data, i have the log file below
5 shagged cdr's later , i have contacted nero or ahead and they say 3 working days to answer .i need to back up my docs sooner than that.
anyone have any ideas?

_{<b>Mod note: removed possible serial#</b>}

Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1017), size=48128 bytes, created 12/11/98 12:06:00
Nero Version: 5.5.10.26 (Nero Express)
Recorder: <ATAPI CD-RW 52X32> Version: M.GD - HA 0 TA 1 - 5.5.10.26
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI DVD-ROM GD-5000>Version: 0213 - HA 0 TA 0 - 5.5.10.26
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
HITACHI DVD-ROM GD-5000 (Target 0, D:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
ATAPI CD-RW 52X32 (Target 1, E:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 510MB (523140kB)
Free physical memory: 4MB (4928kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

6.1.2004
CD-ROM (ISO)
14:41:50 #1 Text 0 File Isodoc.cpp, Line 7579
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

14:41:50 #2 Phase 87 File dlgbrnst.cpp, Line 1655
Seamless Link activated

14:41:50 #3 Text 0 File Reader.cpp, Line 115
Reader running

14:41:50 #4 Text 0 File Writer.cpp, Line 125
Writer ATAPI CD-RW 52X32 running

14:41:50 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

14:41:50 #6 Text 0 File Burncd.cpp, Line 3735
Turn on Track-At-Once, using CD-R/RW media

14:41:50 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 160913 (160913) = #160913/35:45.38
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

14:41:51 #8 Text 0 File DlgWaitCD.cpp, Line 221
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 160912 (35:47.37)

14:41:51 #9 Text 0 File DlgWaitCD.cpp, Line 226
Write in overburning mode: FALSE

14:41:51 #10 Text 0 File DlgWaitCD.cpp, Line 1678
Recorder: ATAPI CD-RW 52X32;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

14:41:51 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder ATAPI CD-RW 52X32 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 329857024

14:41:51 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.

14:41:51 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 160913 (160913) = #160913/35:45.38
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 160911 blocks [ATAPI CD-RW 52X32 ]
--------------------------------------------------------------

14:41:51 #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

14:41:51 #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

14:41:51 #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 52x (7,800 KB/s)

14:41:51 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

14:41:51 #18 Text 0 File Mmc.cpp, Line 17869
Set BUFE: Seamless Link -> ON , Auto Pilot : ON

14:45:15 #19 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

14:45:22 #20 Text 0 File Mmc.cpp, Line 12869
<ATAPI CD-RW 52X32 > start Close Session

14:49:22 #21 SCSI -1169 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

14:49:22 #22 MMC -1169 File ThreadedTransferInterface.cpp, Line 994
Logical unit not ready, operation in progress

14:49:22 #23 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 994
Could not perform Fixation

14:49:22 #24 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0525F88C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x41 0x04 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

14:49:22 #25 MMC -1023 File ThreadedTransferInterface.cpp, Line 994
Command sequence error

14:49:22 #26 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 994
Could not perform Fixation

14:49:22 #27 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x017DCA70
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00

14:49:22 #28 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x017DCA70
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00

14:49:22 #29 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x017DCA6C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00

14:49:22 #30 SCSI -1023 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x017DCA6C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00

14:49:22 #31 MMC -1023 File WriterStatus.cpp, Line 168
Command sequence error

14:49:22 #32 TRANSFER -39 File WriterStatus.cpp, Line 168
Could not perform EndSession

14:49:22 #33 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 52x (7,800 KB/s)

14:49:53 #34 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

14:50:03 #35 SCSI -1169 File Cdrdrv.cpp, Line 1212
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 23/04/99 22:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/02 18:55:38
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 31/03/03 15:31:06
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 31/03/03 15:31:06
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 10/04/00 07:10:56
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 23/04/99 22:22:00
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 23/04/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 23/04/99 22:22:00
File 'ZMPROP.CPL': Ver=Version 2.0, size=33280 bytes, created 02/12/03 18:23:32
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 23/04/99 22:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 23/04/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 23/04/99 22:22:00 (Adapter driver for rec)

Registry Keys:


thanks
jp

[Statica]

Have you tried updating your version of Nero to 5.5.10.54? http://www.nero.com/en/631933457317970.html

[lostplanet]

i not too sure which version i have
it says nero express v5.5.10.26 on the disk ,i dont want to assume it is a "nero 5" ie without the express bit
is nero express and plain ole nero the same program?
whats the difference?
thanks
jp

[lostplanet]

ok i've DLd new software and have found that it still doesnt burn data CDRs, but it will burn CDrws at 12x that works fine,
but no CDrs at 52x ,
i believe the drive should write at 32x and cant suss how to slow it down
any ideas welcome
thanks
jp

[Blue_Gundam2002]

Originally posted by lostplanet
ok i've DLd new software and have found that it still doesnt burn data CDRs, but it will burn CDrws at 12x that works fine,
but no CDrs at 52x ,
i believe the drive should write at 32x and cant suss how to slow it down
any ideas welcome
thanks
jp
What is the speed of your cd-r/rw and your cd's?

[lostplanet]

the CD/RW is a benQ 52X32 and the cdrs im using are 52x 700mb multispeed
in the nero program it says the write speed is at 52x.
jp

[lostplanet]

i have reduced the write speed to 32x and no difference the program locks up after giving you a error message and the drive keeps on spinning until i restart the system.
i have also tried a different program called zillasoft http://download.com.com/3000-2646-10250242.html?tag=lst-0-18
and have the same problem when it comes to closing data cdrs, what does this mean ?
i am only trying to save word.docs ,excel ,PDF's , html(web pages) , .gif and .jpegs

[Statica]

Have you tried updating the drive firmware?

[lostplanet]

not yet and to be honest i woludnt know how to.
but i have discovered it will write at 24x to CDRs although why nero doesnt select this is beyond me.
thanks statica
jp

[lostplanet]

and finally a breakthru,(benQ cpw 5232p)
firmware update:http://www.benq-eu.com/ServiceAndSupport/Drivers/drivers.cfm?product=575#3
hopefully this will sort it after i have installed xp.
thanks v much for your help statica