Force Flow
03-18-2004, 03:15 PM
Kingston® Technology Company, Inc., the independent world leader in memory products, today announced the release of DDR2 memory modules. Shipping immediately in limited quantities, Kingstonā offers 400- and 533- MHz DDR2 Registered DIMMs, Unbuffered DIMMs and SODIMMs, in capacities up to 1 GB, to support the next-generation computer platforms launching in 2004.
http://www.kingston.com/press/2004/memory/03b.asp
Images:
http://hardocp.com/image.html?image=MTA3OTYzNzU1OEN1MDdPWm4wbHJfMV8xX2wuanBn
http://hardocp.com/image.html?image=MTA3OTYzNzU1OEN1MDdPWm4wbHJfMV8yX2wuanBn
http://hardocp.com/image.html?image=MTA3OTYzNzU1OEN1MDdPWm4wbHJfMV8zX2wuanBn
http://hardocp.com/image.html?image=MTA3OTYzNzU1OEN1MDdPWm4wbHJfMV80X2wuanBn
http://hardocp.com/image.html?image=MTA3OTYzNzU1OEN1MDdPWm4wbHJfMV81X2wuanBn
You will notice differences immediately. Such as the Ball Grid Array chips as opposed to what we normally see TSOPs being used for (i.e., the chips do not have the connecting wires out the sides anymore but are rather connected via solder points on the back of the chip that cannot be seen after attached). Also you will notice that the notch is in a different place. DDR and DDR2 are NOT cross compatible even though the sticks are very similar to the naked eye. Looking closer, with the connecting points compared, you will see that the DDR2 has many more than DDR1. DDR2 will bring with it faster speeds and lower voltages.
http://www.kingston.com/press/2004/memory/03b.asp
Images:
http://hardocp.com/image.html?image=MTA3OTYzNzU1OEN1MDdPWm4wbHJfMV8xX2wuanBn
http://hardocp.com/image.html?image=MTA3OTYzNzU1OEN1MDdPWm4wbHJfMV8yX2wuanBn
http://hardocp.com/image.html?image=MTA3OTYzNzU1OEN1MDdPWm4wbHJfMV8zX2wuanBn
http://hardocp.com/image.html?image=MTA3OTYzNzU1OEN1MDdPWm4wbHJfMV80X2wuanBn
http://hardocp.com/image.html?image=MTA3OTYzNzU1OEN1MDdPWm4wbHJfMV81X2wuanBn
You will notice differences immediately. Such as the Ball Grid Array chips as opposed to what we normally see TSOPs being used for (i.e., the chips do not have the connecting wires out the sides anymore but are rather connected via solder points on the back of the chip that cannot be seen after attached). Also you will notice that the notch is in a different place. DDR and DDR2 are NOT cross compatible even though the sticks are very similar to the naked eye. Looking closer, with the connecting points compared, you will see that the DDR2 has many more than DDR1. DDR2 will bring with it faster speeds and lower voltages.