what is the best tool to cut your case

[willboy]

I want to install a case window, and I was going to buy a dremel and was wonering if this was the best one and if the included attachments are okay.
Here is were I am going to buy it.
http://homedepot98home.crossmediaservices.com/homedepot/default.aspx?action=detail&storeid=2398011&rapid=0&pagenumber=0&listingid=-2098141755&offerid=&ref=%2fhomedepot%2fdefault.aspx%3faction%3dsearch%26storeid%3d2398011%26searchtext%3ddremel%26go.x%3 d0%26go.y%3d0%26go%3dGo

[willboy]

Should I get the accesory kit?
http://homedepot98home.crossmediaservices.com/homedepot/default.aspx?action=detail&storeid=2398011&rapid=0&pagenumber=0&listingid=-2098141684&offerid=&ref=%2fhomedepot%2fdefault.aspx%3faction%3dbrowsecategoryl2%26storeid%3d2398011%26CatTreeID%3d4903%2 6L2CatID%3d4903

[Cricket]

To cut a case all you need is the Dremel Tool and some reinforced cutting wheels. You really don't need all that other stuff. The sanding wheels and wire brush attachments come in handy.

If you want to get that Dremel Tool Kit and Accessory kit, that's up to you...but you really don't need all that for case modding. Might come in handy around the house though.

:) Cricket

[Fibre Optix]

If you do other projects, Cut tiles, grout, drywall then get it. It's a nice set. I bought the Dremel set with the big and small rotary saw combo (just bought a house I'll need it).

http://www.dremel.com/productdisplay/tool_template2.asp?SKU=9000-04&Color=99CCFF

I'm just wrapping up my first case MOD with it. Coming out Nice. It's great with curved cuts. I experimented with a jig saw. For cutting fast smooth staright lines nothing beats it. But you can screw up easily with it so take your time if you use one. I picked my Jig up @ Home depot here in Canada for 30 bucks Canadian and a jig blade set of 12.

http://www.skil.com/Products/Tools/Jig+Saws/product.htm?id=4230

[willboy]

Thanks for the relplies guys. :) But I was wondering, what are the reinforced cutting wheels, and are those included in the regular one.

[willboy]

Oh yeah, what should I get the one that Fibre Optix sugested or the one that I suggested,
http://homedepot98home.crossmediaservices.com/homedepot/default.aspx?action=detail&storeid=2398011&rapid=0&pagenumber=0&listingid=-2098141755&offerid=&ref=%2fhomedepot%2fdefault.aspx%3faction%3dsearch%26storeid%3d2398011%26searchtext%3ddremel%26go.x%3 d0%26go.y%3d0%26go%3dGo

or

http://www.dremel.com/productdisplay/tool_template2.asp?SKU=9000-04&Color=99CCFF

[Fibre Optix]

I meant if your going to use it for work around the house or on your car as well....then go for the set you wanted originally with all the suff, it will come in handy. If it's just for the case mod.... then I suggest buy only the saw thingy for half the set price (in your set)

http://www.dremel.com/productdisplay/tool_family_template.asp?SKU=1003009005&Color=99CCFF

and buy your peices seperately. It will work out cheaper.

http://www.dremel.com/html/products/accessories/rotary.html

They're about 4 bucks each depending on what you buy.

I was only pointing out the big rotary saw just to inform.

The re-enforced blades just mean heavy duty. I used heavy duty and regular.....the heavy duty ones (5 blades for 10 bucks) just lasted longer. I think in the image i see 2 of them.... but I'm not sure.

Just ask the guys at home Depot, tell them your cutting a design into metal.......What do I need? They'll let you know.
Make sure you ask an older guy...the youger ones usually have no idea.

Good luck and have fun.

[willboy]

THANKS!!!!!!!!!

[willboy]

I got the dremel mutipro, thanks for the help!

[Fibre Optix]

No problem...have fun.

[willboy]

Which attachment do I use to cut he metal with?

[willboy]

I got this attachment that says it is supposed to cut mettal, but It just goes skittering around when it comes in contact with the metal.

[willboy]

So then I used one of those cutting wheels and there is a ton of sparks but at least it cuts it, is it okay to have all those sparks?

[Cricket]

Originally posted by willboy
So then I used one of those cutting wheels and there is a ton of sparks but at least it cuts it, is it okay to have all those sparks? Yes, that's normal. Just make sure you use eye protection.

:) Cricket

[Fibre Optix]

Ya don't expect it to cut like a saw on wood. Take your time the sparks means it working.

Tip: Don't immediately start cutting. (If you already did that is okay). Trace the design with your saw first, then do it again and again by pressing harder each time. Your design will come out smoother....this is just my opinion....

Oh ya you get better results if you cut inside out.

Here is a link you should check out.... I saw what this guy did and basicly copied him. Really good Dremel guide..you'll see what I mean from the tips I described.

http://www.twistedmods.com/article.php?artid=270

[Designer]

Just remember, when you are using a grinding attachment, you won't remove metal faster by pushing harder, all you'll do is wear out the grinding attachment faster. Don't do the work, let the tool work for you.

[willboy]

Thanks for the advice guys

[grasshopperbe]

I havent seen this in anyone else's post, but be a bit careful when doing a lot of metal cutting with a dremel, certainly with harder and/or thicker metal. Dremels can overheat and break down rather easily at this. be sure to have the "ventilation holes" open

another thing that i have learned from personal experience is that you shouldnt put too much force on the wrench and the metal part on top (on which you use the wrench) . on mine noth these parts got 'deformed' (scraped out) by maybe putting it a bit too fixed. the replacement parts i got dont really fit 100% well

[scomac]

I WISH I had bought a dremel before I decided to cut my first case. I bought a window kit and then bought the special case cutter that they had on display right next to the window kits. I got home, traced out the window, drilled the pilot hole for the case cutter and started cutting. 3 hours later, I FINALLY had my case cut (after having to recut it a second time because the initial cut didn't allow for the window molding). Oh, and by the way, my hands hurt for the next week from all that cutting!!

Next time, I'm just going to buy a case that already has the window in it, or if I don't do that, I'll be using my dremel. :D