Motherboard connection problems

[gokuson123]

I took apart my comp to clean it...could have made a sweater with all the dust. But I was unsure on where some wires went when putting it back together, as I took off the motherboard and all wires and cables. I attempted to put it back, but my UPS went into Overload mode. I am more of a software person, and am hesitant of doing anythign else. I have an FIC K8 800T for an AMD 64 3200+, but the manual is not available for downlaod, go figure. Any help is appreciated.

[blue60007]

Might want to try this:
http://forum.pcmech.com/showthread.php?t=132409

[Cricket]

You aren't sure where the wires go? Do you have a digital camera? If you do, take some pictures and post them here and we'll see if we can help you figure out what goes where.

Cricket

[gokuson123]

Hmm a digital cam pic would be good enough? You won't even be able to see the connector pins on the board in it...

[jayb1234]

For a good picture of that motherboard, go to this page and click on view full size photo.

Here is a review page that covers some of the connections

.

[gokuson123]

Hmm. Well the computer I am on has limtied capabilities, it is my parents and they want to take it to a "profesional" to get WIndows re-instaleld so I can't really do much on it. Internet is whacked...so can you write up a diagram of where the cabels and stuff should go? Other wise I might have to scrap the whole thing. It's an $1,800 system, and I don't really want to do that. PLus I don't have a penny to spend on any parts. Basically, any one who can draw up a diagram using the image of the mobo from the site would be of great help.