|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
12-23-2005, 10:07 AM
|
#1 |
|
Member (2 bit)
Join Date: Dec 2005
Posts: 2
|
Noob needs help
Hi guys i have purchased all my components and a friend said to start with a basic setup. I was told to assemble the mobo outside the case to test it just fitting the cpu, ram and gfx card. I am worried about doing this as i don't know what to place the mobo on while i do this. Last thing i want to do is short the board by putting it on the wrong surface. My spec is as follows
Asus A8n sli premium AMD 4400 X2 Inno3d 7800gtx Corsair xms 1024 pc3200 (2 gig in total) Western Digital 74 gig raptor hitachi Deskstar 250 gig sata 2 Nec dvd burner Sony floppy Thermaltake tsunami dream case Thermaltake Silent Purepower 560w psu thanks in advance for any help. |
|
|
|
12-23-2005, 10:10 AM
|
#2 |
|
Wx geek
Join Date: Aug 2005
Location: Indiana
Posts: 6,638
|
Use the box the motherboard came in....just keep the anti-static bag clear.
__________________
"It is the way of man to make monsters and it is the nature of monsters to destroy their makers." |
|
|
|
|
12-23-2005, 10:12 AM
|
#3 |
|
Member (2 bit)
Join Date: Dec 2005
Posts: 2
|
Thanks a lot will try that
 .
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
