Go Back   PCMech Forums > Help & Discussion > Build Your Own PC

Need Some Help? Type Your Keywords Here:

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 12-26-2005, 04:19 PM   #1
Member (8 bit)
 
Leogecko's Avatar
 
Join Date: Aug 2005
Posts: 143
Front Panel Connectors on CM Stacker

Alright, I'm making progress on my new build, though I've run into problems with making the front panel connections. Firewire and USB were easy enough, but I have no idea where to put the power switch, LED, or audio connectors. Neither the motherboard manual nor the case documentation are much help. (Asus A8N32-SLI Deluxe and CM Stacker)
Leogecko is offline   Reply With Quote
Old 12-26-2005, 04:28 PM   #2
Dark
 
Dark Nova's Avatar
 
Join Date: May 2004
Posts: 1,128
Send a message via MSN to Dark Nova
Usaly the connecters for the front case to the mobo, is in the down, right corner.

for the case each connectors should have 2colours, remember when your connecting, always COlour to the left, ground to the right

Audio connectors are close to the PCI slots
__________________
1.
Intel Core2Duo 3Ghz|Asus P5K Deluxe Wifi|4GB DDR2 800Mhz| Seagate 500GB*2| Evga 8800GTX 768MB| Antec SonataII case w/ 550W TruePower PSU|XP Pro
2.
AMD Athlon 64 3500|Asus A8N-sli deluxe|2GB DDR ram|Maxtor 250GB HDD|ASUS NVIDIA 6800 256MB|antec sonataII case w/ 450W PSU|XP home
Dark Nova is offline   Reply With Quote
Old 12-26-2005, 05:01 PM   #3
Wrench Bender
 
flanzig1's Avatar
 
Join Date: Dec 2002
Location: Plymouth,MN
Posts: 5,961
The pins and the connectors may have different abbreviated names like:
Power switch: ATX pwr/PWR/POWER SW/PWR SW
Reset Switch: RST/RST SW/RESET SW
Hard drive LED: HDD LED/HD LED/IDE led
POWER ON LED: POWER LED/PWR LED/
__________________
"When sliding down the banister of life; look out for splinters pointing up."
flanzig1 is offline   Reply With Quote
Old 12-26-2005, 06:28 PM   #4
Member (8 bit)
 
Leogecko's Avatar
 
Join Date: Aug 2005
Posts: 143
Alright, so I found the region that you were talking about Nova. (for the power switch, power led, etc.). Is the ground usually a white wire?
Leogecko is offline   Reply With Quote
Old 12-26-2005, 10:34 PM   #5
Member (12 bit)
 
not important's Avatar
 
Join Date: Jul 2002
Location: Illinois
Posts: 3,557
Ground is usually white or black.
not important is offline   Reply With Quote
Reply

Bookmarks

Still Need Help? Type Your Keywords Here:


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 01:38 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 PL2