|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (4 bit)
Join Date: Dec 2005
Posts: 10
|
I've just ordered a Foxconn SiS 755 MOBO and a Sempron 2600+ processor, and tried installing it in an existing system. After a pretty sound installation, I can't even get the BIOS to boot. I think I can hear the processor boot, but I still get no signal on the monitor. I tried a couple of old video cards to rule out a problem with the vid card, and still had no signal. The reviews on NEWGG said this mobo doesn't boot with a sempron 64 processor, but my processor's not a 64 bit one... I think.
So is it a a) fried processor or mobo? or b) video card problem? or something else I'm not aware of? |
|
|
|
|
|
#2 |
|
Professional gadfly
|
Do you hear any beeps at all? Do the fans start turning? Have you followed all the steps in this thread: http://forum.pcmech.com/showthread.php?t=132409
|
|
|
|
|
|
#3 |
|
Member (10 bit)
Join Date: Jan 2005
Location: brooklyn, ny
Posts: 920
|
it could bad ram, cpu, psu, or mobo. probably its a bad mobo,cuz more things can go wrong with a mobo than a, say ram module
__________________
"Young people everywhere have been allowed to choose between love and a garbage disposal unit. Everywhere they have chosen the garbage disposal unit." Guy Debord |
|
|
|
|
|
#4 |
|
Member (12 bit)
Join Date: Sep 2005
Posts: 2,509
|
What was the old system?
|
|
|
|
|
|
#5 |
|
Member (4 bit)
Join Date: Dec 2005
Posts: 10
|
No beeps, but the fans work.
And the old system was, well old... PII generation stuff. |
|
|
|
|
|
#6 |
|
Professional gadfly
|
If you followed all the steps in the link I previously posted, and you still don't even get a beep, it's probably a bad motherboard. Foxconn isn't known for quality.
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|