|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-06-2006, 12:57 PM
|
#1 |
|
Member (4 bit)
Join Date: Sep 2005
Posts: 15
|
No power To Abit board
I bought my Abit Nf-8 in september. built the machine in my signature.
2 days ago while working it just shut off. i thought it was the power supply so i bought the Ultra been meaning to up grade ant way. Now the little Led lites(LED1{5VSB}) up to show the power supply is connected but when you you press the power rocker there seems to be no system power.. i.e. the system power light (LED2{VCC}) does not come on. i am waiting on feedback from Abit. this is my second computer i have put together and i wondering how i can trouble shoot whether power is reachng the board. And whether the powersupply was really bad in the first place. Any help would be appreciated. |
|
|
|
01-06-2006, 01:16 PM
|
#2 |
|
~ Ryan ~
Join Date: Jun 2005
Location: Jackson TN
Posts: 3,516
  |
Did you check all the connections to make sure you didn't miss anything? Did you make sure you connected the 4 pin connection next to the CPU - it is often forgotten.
__________________
RiotCats.com, an internet domain specifically fabricated and visually erected for the appreciation of the feline kingdom! |
|
|
|
|
01-06-2006, 01:40 PM
|
#3 |
|
Member (4 bit)
Join Date: Sep 2005
Posts: 15
|
the system was working fine for past 4/5 months and just died.
thats why i am puzzled and desperate. |
|
|
|
|
01-06-2006, 02:17 PM
|
#4 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
Try this troubleshooter. You must remove the motherboard from the case when doing this. Post your results.
 Cricket
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
