|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-07-2006, 05:57 PM
|
#1 |
|
Member (7 bit)
Join Date: Jan 2006
Posts: 70
|
beep code
While installing the OS, WinXP pro in our new build, it froze during the partioning at 37%. After about 1 1/2 hrs I tried to exit out but was unable. I finally just turned off the computer. Now, when I tried to reboot all I get is a 1 long beep, beep code and no post to the monitor. Any guesses what I hosed in there? I tried to clear the CMOS and start over and still get the same beep.
Mark |
|
|
01-07-2006, 06:50 PM
|
#2 |
|
Member (14 bit)
Premium Member
Join Date: Jan 2002
Location: The Great NorthWest
Posts: 12,594
|
|
|
|
|
01-07-2006, 08:03 PM
|
#3 |
|
Served with Pride
Staff
Premium Member
Join Date: Apr 2003
Location: near the left coast of Michigan
Posts: 14,565
 |
Please don't crosspost. One thread per problem/topic.
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
