|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-12-2006, 03:48 PM
|
#1 |
|
Member (5 bit)
Join Date: Nov 2004
Posts: 20
|
help plz, no power
my pc wouldn't boot this morning, at first i thought it was the psu so i replaced it with a known working one and nothing. I then ripped the mb out and tried to get it running outside the box and nothing, no fan, no beeps, nothing...It seems like to me its a faulty board but how can I know its not a burnt out processor as well? thanks
Specs epox 8kda3+ amd 64 3.0ghz 1gb ddr 400 ati radeon 9550 antec 400w psu |
|
|
|
01-12-2006, 03:54 PM
|
#2 |
|
Served with Pride
Staff
Premium Member
Join Date: Apr 2003
Location: near the left coast of Michigan
Posts: 14,565
 |
Did you try it with only one stick of memory? Do you have any other memory to test with? Did you do the out of box test without a hard drive attached?
|
|
|
|
|
01-12-2006, 04:03 PM
|
#3 |
|
Member (5 bit)
Join Date: Nov 2004
Posts: 20
|
yes, i've tried with only 1 stick of memory and there is no harddrive attached.
|
|
|
|
|
01-12-2006, 04:08 PM
|
#4 |
|
Served with Pride
Staff
Premium Member
Join Date: Apr 2003
Location: near the left coast of Michigan
Posts: 14,565
|
If you connect a speaker to the mobo front panel speaker pins (or if your mobo has a small pezeo speaker built in), you should get a beep code when you try to boot with no memory installed. If you don't, I'd say the mobo is the problem.
|
|
|
|
|
01-12-2006, 04:13 PM
|
#5 |
|
Member (5 bit)
Join Date: Nov 2004
Posts: 20
|
i think its shot too, thanks for the help.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
