Need Some More Help with my Computer!!

[SpectreT6]

Hey Guys remember me, the one who thought there CPU was overheating, well it was a combination of things, Here now i have figured out the the New Egg CPU was rated at 1000 FSB, i thought ohh cool, I can now get this motherboard to fit the 1000 FSB Processer, well after it wouldnt work, and shut down the problem arose that it might be the Motherboard, so I send the one back i had, got a NVIDIA PRO SLI and would you look at that it works, (Ohh I also put some Artic Silver Thermal crap on the heatsink+processer, well now the comp is running at a Steady 30 degress. And awesomely fast, (If that is even a word).

Turns out that the 3200 is a 2000FSB processer and the Newegg site says its a 1000FSB, atleast thats what Tiger Direct and Sandra says

My question now is after a week of haveing the computer, Every now and then while playing Battlefield 2 the computer shuts off, now this doesent happen every day, and only when Im playing Battlefield 2 .

I have Sandra Software installed here are the results:

SiSoftware Sandra

Mainboard
Manufacturer : Gigabyte Technology Co., Ltd.
MP Support : 1 CPU(s)
MPS Version : 1.40
Model : GA-K8N Pro-SLI
Version : x.x
Serial Number : Mon Jan 09 10:11:54 2006

System BIOS : 12/05/2005----------------------

System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 4
Maximum Installable Memory : 16GB
Bank0/1 - A0 : Empty
Bank2/3 - A1 : Empty
Bank4/5 - A2 : Empty
Bank6/7 - A3 : Empty

Chipset 1
Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration
Bus(es) : ISA PCI PCIe USB FireWire/1394
Version : 1.02
Front Side Bus Speed : 2x 1030MHz (2060MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 1000MHz / 2x 200MHz
In/Out Width : 16-bit / 16-bit
IO Queue Depth : 8 request(s)

Chipset 1 Hub Interface
Type : HyperTransport
Version : 1.02
In/Out Width : 16-bit / 16-bit
Speed : 2x 1030MHz (2060MHz data rate)

Logical/Chipset 1 Memory Banks
Bank 0 : 512MB DDR-SDRAM 2.5-3-3-3CL 2CMD
Bank 1 : 512MB DDR-SDRAM 2.5-3-3-3CL 2CMD
Channels : 1
Bank Interleave : 2-way
Speed : 2x 205MHz (410MHz data rate)
Multiplier : 1/10x
Width : 128-bit
Refresh Rate : 5.00µs
Power Save Mode : No
Fixed Hole Present : No

Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 25.0°C / 77.0°F
CPU Temperature : 23.0°C / 73.4°F
(CAUTION)Power / Aux Temperature : 71.0°C / 159.8°F

Cooling Device(s)
Auto Fan Speed Control : No
Chassis Fan Speed : 3245rpm

Voltage Sensor(s)
CPU Voltage : 1.39V
Aux Voltage : 2.64V
+3.3V Voltage : 3.34V
+5V Voltage : 2.98V
+12V Voltage : 11.29V
-12V Voltage : -7.92V
-5V Voltage : -0.78V
Standby Voltage : 4.44V
Battery Voltage : 4.08V

PCI Bus(es) on Hub 1
Version : 2.20
Number of Bridges : 5
PCI Bus 0 : PCI (1/1x PCIClk)
PCI Bus 1 : PCI (1/1x PCIClk)
PCI Bus 2 : PCIe (3/1x PCIClk)
PCI Bus 3 : PCIe (3/1x PCIClk)
PCI Bus 4 : PCIe (3/1x PCIClk)
PCI Bus 5 : PCIe (3/1x PCIClk)

LPC Hub Controller 1
Model : Giga-Byte Technology ??? (0050)

USB Controller 1
Model : Giga-Byte Technology ??? (005A)
Version : 1.00
Interface : OHCI
Channels : 10
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : Giga-Byte Technology ??? (005B)
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 10
Companion Controllers : 1
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No

FireWire/1394 Controller 1
Model : Giga-Byte Technology ??? (8025)
Version : 1.10
Interface : OHCI
Enhanced Support : No
Channels : 64
Speed : 400MHz

Expansion Slot(s)
PCI (9h) : PCI 32-bit +5V +3.3V PME i2c/SMBus Full-Length Available (Nvidia Corp ??? (005C))
PCI (Eh) : PCI 32-bit +5V +3.3V PME i2c/SMBus Full-Length Available (Nvidia Corp ??? (005D))

Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - None / PS/2
PS/2 Mouse - Detected : Mouse - PS/2 / PS/2
USB : USB - None / USB

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Tip 2546 : Large memory modules should be ECC/Parity.
Warning 2518 : Mainboard temperature is too high. (NOTICE THE TEMPERATURE ON TEH BOARD TEMP^^^^???
Tip 2536 : System has no SMBus/i2c/BMB bus support.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

I was going to thin this out but ill let you guys look it over, and if you need anything else just ask. I have 2 fans, an 80(Side) and a 120(Back)
the variable PSU Fan
Rosewill 500W PSU
Have FUN Thanks for any help.

[glc]

You have a bad power supply. The voltages are all out of spec. Rosewills are not quality power supplies. You need a quality ATX 2.0 unit with a 24 pin power connector. If you are running SLI, you need a SLI-certified power supply.

[SpectreT6]

Thanks, now i askl this question to everyone are you shure, and i have a24 pin connecter, and Im not running in SLI at the moment.

[glc]

+3.3V Voltage : 3.34V +5V Voltage : 2.98V +12V Voltage : 11.29V -12V Voltage : -7.92V -5V Voltage : -0.78V

Tolerance is +/- 10%, +/- 5% is all I will accept.