|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
02-21-2006, 05:54 PM
|
#1 |
|
Member (5 bit)
Join Date: Feb 2006
Posts: 21
|
new build components!! need checked
hi
I have attatched my new build specks. could someone who knows what they are doing please look and give any advice on whether this is ok or not? thanks in advance |
|
|
|
02-21-2006, 05:57 PM
|
#2 |
|
Member (5 bit)
Join Date: Feb 2006
Posts: 21
|
attatchment?
|
|
|
|
|
02-21-2006, 06:00 PM
|
#3 |
|
Member (5 bit)
Join Date: Feb 2006
Posts: 21
|
here
|
|
|
|
|
02-21-2006, 07:49 PM
|
#4 |
|
Member (7 bit)
Join Date: Jan 2006
Location: MN
Posts: 109
|
LN11451 I assume it is the CPU Fan/Cooler/Heatsink, it's going to be noisy coming in around 38.5 dbl the case PSU is not going to do it 300W is just not enough anymore. Better to buy a case with no PSU and get a good quality one shoot for an Antec, or another of similar quality . I don't use Foxconn mobo's I could not give you an evaluation on that
|
|
|
|
|
02-21-2006, 08:14 PM
|
#5 |
|
Member (5 bit)
Join Date: Feb 2006
Posts: 21
|
thanks very much i will now start looking around
|
|
|
|
|
02-21-2006, 08:16 PM
|
#6 |
|
Member (5 bit)
Join Date: Feb 2006
Posts: 21
|
i could change the foxconn mobo to
Abit NI8-SLi GR S775 PCI-E NVC19/MCP04 DDR2 SATAII Raid Gbit Lan USB2 7.1Ch Audio |
|
|
|
|
02-21-2006, 08:20 PM
|
#7 |
|
Member (7 bit)
Join Date: Jan 2006
Location: MN
Posts: 109
|
At least a 400W (minimum) PSU
|
|
|
|
|
02-21-2006, 08:29 PM
|
#8 |
|
Kickin' it
Staff
Premium Member
Join Date: Jan 2002
Location: USA
Posts: 7,723
 |
Good choice on the motherboard change.
As for a PSU, try the Antec TruePower 430 on this page: http://www.overclockers.co.uk/acatal...Antec_103.html 
__________________
Fold for PCMech: Team 13761 |
|
|
|
|
02-21-2006, 08:54 PM
|
#9 |
|
Member (5 bit)
Join Date: Feb 2006
Posts: 21
|
WOW thanks everyone!
i have changed the case, and the psu is now :- http://www.scan.co.uk/Products/Produ...oductID=256346 Also I have changed the mobo to http://www.scan.co.uk/Products/Produ...oductID=209419 ??? is this ok it seems better spec? thanks again for your time! |
|
|
|
|
02-21-2006, 09:00 PM
|
#10 |
|
Kickin' it
Staff
Premium Member
Join Date: Jan 2002
Location: USA
Posts: 7,723
|
Excellent choice for the motherboard.
I would change the power supply to this: http://www.scan.co.uk/Products/Produ...oductID=284214 The key to buying power supplies is not just watts, but quality. And Enermax is one of the best.
|
|
|
|
|
02-21-2006, 09:28 PM
|
#11 |
|
Member (5 bit)
Join Date: Feb 2006
Posts: 21
|
excellent - thanks for the psu tip!
i have now changed the graphics card to http://www.scan.co.uk/Products/Produ...oductID=200306 but i have real concerns that i am wasting money on the card with the budget monitor i have. I am now way past my budget and can not go any higher! http://www.scan.co.uk/Products/Produ...oductID=229924 |
|
|
|
|
02-21-2006, 09:34 PM
|
#12 |
|
Member (8 bit)
Join Date: Dec 2005
Posts: 128
|
I don't think you will need that motherboard if you don't plan on gaming. you should go with a non-sli one that use pci-e from your original plans it doesn't look like you will be...but it's your own choice
|
|
|
|
|
02-21-2006, 09:44 PM
|
#13 |
|
Member (5 bit)
Join Date: Feb 2006
Posts: 21
|
ok
i don't understand i will try and find out what you mean, thanks |
|
|
|
|
02-21-2006, 09:49 PM
|
#14 | |
|
Member (8 bit)
Join Date: Dec 2005
Posts: 128
|
Quote:
 sorry that was in relation to another thread that I was talking to people on Ignore what I said. Srry Kody |
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
