|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (7 bit)
Join Date: Mar 2004
Location: DFW
Posts: 92
|
New Build-No Video
Whats up peeps. I have a little problem. I bought some new hardware last night, because my 2 other machines are fried. So i figured I treat myself. Anyways, I bought the Asus K8V-MX, with the Sempron 2800. Im using 2 types of kingston memory, DDR 2700 and I also have some DDR 3200. I havent installed any optical drives and HDD's yet. Well when i boot up the machine the first time, I get no video. Fans spin, green LED pops up, but no video on either of my 3 monitors. I swapped out both memory, and the result is the same. No video. Any help?
|
|
|
|
|
|
#2 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 37,764
|
|
|
|
|
|
|
#3 |
|
this is going to hurt...
Premium Member
Join Date: Aug 2005
Location: Abilene, TX
Posts: 363
|
What type of PSU are you using?
__________________
I am the push that makes you move. Laptop: Asus G50V-A2 |
|
|
|
|
|
#4 |
|
Member (7 bit)
Join Date: Mar 2004
Location: DFW
Posts: 92
|
Raidmax 868WSP Scorpio Mid Tower w/ Window 420W - Silver
|
|
|
|
|
|
#5 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 37,764
|
Not the greatest PSU in the world, but it should at least allow a POST unless it's defective. Did you connect the auxiliary 4 pin connector to the motherboard? You need to do the out of the case as indicated in my link.
|
|
|
|
|
|
#6 |
|
Member (7 bit)
Join Date: Mar 2004
Location: DFW
Posts: 92
|
when i connected the 4pin connector to the board, it wouldnt even boot up. WHen i took it off, it powered right up. I wil ltry the out of case thing tonite.
|
|
|
|
|
|
#7 |
|
Member (8 bit)
Join Date: Dec 2005
Posts: 128
|
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|