|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-14-2006, 02:18 PM
|
#1 |
|
Member (1 bit)
Join Date: Apr 2006
Posts: 1
|
Monitor Problems
Hi, I'm new here, built my first build using the guide here, and now I've run into some problems on the initial bootup.
Here are the parts I used: http://www.newegg.com/Product/Produc...82E16819103562 http://www.newegg.com/Product/Produc...82E16813130491 http://www.newegg.com/Product/Produc...82E16814130283 http://www.newegg.com/Product/Produc...82E16820141423 My vid card uses a dvi to vga converter, and when I plug my monitor and turn on the pc, nothing shows up. I get the yellow light. All my LEDs and fans turn on and I'm confused as to what to do right now. I'm sure my processor is seated correctly and so is my vid card. Thanks to all that help.  http://img527.imageshack.us/img527/5637/cimg00037cw.jpg http://img126.imageshack.us/img126/9861/cimg00045hp.jpg http://img126.imageshack.us/img126/7079/cimg00054gb.jpg http://img126.imageshack.us/img126/3350/cimg00061yt.jpg http://img527.imageshack.us/img527/4264/cimg00086ra.jpg Last edited by Axel; 04-14-2006 at 02:22 PM. |
|
|
|
04-14-2006, 04:16 PM
|
#2 |
|
Telcom Tech
Join Date: Feb 2002
Location: Western, Pa.
Posts: 5,409
|
Here is the best place to start the troubleshooting process:
http://forum.pcmech.com/showthread.php?t=132409
__________________
If it ain't broke, "TWEAK IT" |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
