|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
05-13-2006, 04:09 PM
|
#1 |
|
Member (2 bit)
Join Date: May 2006
Posts: 2
|
First power up
Hi, Guys. I just powered up for the first time. Everything seems to be in order. Thanks for the previous advise. All 6 fans ran, the ram sticks lit up like Christmas trees, and hard drives activity led's were ablinking. Floppy also showed activity. The only thing I'm not sure of is that the DVD /CDs light didn't light. Also the door wouldn't open. Is this normal or do I have a problem? Thanks in advance for your support. Sincerely, Tony.
|
|
|
|
05-13-2006, 05:05 PM
|
#2 |
|
Wrench Bender
Join Date: Dec 2002
Location: Plymouth,MN
Posts: 5,961
|
Check the power and data cables to make sure that they are fully seated. Also,check the jumper settings are set for the type of data cable you have: 80 wire,set to CS/40 wire,master/slave(if on the same cable)
__________________
"When sliding down the banister of life; look out for splinters pointing up."
|
|
|
|
|
05-13-2006, 05:50 PM
|
#3 |
|
Member (2 bit)
Join Date: May 2006
Posts: 2
|
I connected cd rom ribbon for data on the middle connection and the unit is jumpered as master.
|
|
|
|
|
05-13-2006, 05:55 PM
|
#4 |
|
Member (9 bit)
Join Date: Mar 2003
Posts: 430
|
door wouldnt open? is the power cable to the drive pushed in as far as itll go. Glad to hear everything else turned out allright.
|
|
|
|
|
05-14-2006, 10:52 AM
|
#5 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 37,765
|
Middle connector on an 80 wire cable is slave, jumper it to CS. If it's 40 wire, it doesn't make a difference.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
