|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
05-20-2006, 01:18 AM
|
#1 |
|
Member (3 bit)
Join Date: May 2006
Posts: 6
|
pc newb needs help
i built my system using the guide here and when i plug in the power one of the lights stays on and doesnt turn off ever unless i unplug it. so if any one can help me please do
|
|
|
|
05-20-2006, 01:44 AM
|
#2 |
|
Member (12 bit)
Join Date: Sep 2005
Posts: 2,509
|
Which light are you referring to?
|
|
|
|
|
05-20-2006, 02:50 AM
|
#3 |
|
Member (3 bit)
Join Date: May 2006
Posts: 6
|
i fixed that problem i forgot to plug in the power switch. now everything turns on and everything looks right except im not getting any visual and sometimes i get the beep for no video card or bad memory even though the fan on the card i spinning
|
|
|
|
|
05-20-2006, 12:11 PM
|
#4 |
|
Member (10 bit)
Join Date: Mar 2006
Location: Toronto, Canada
Posts: 810
|
Hi dumpster, welcome to PCMech.
The first thing you should do is try an "out-of-case" build. Then we can keep everything constant, and we will know exactly what is going on. Go here. Tell us what happens 
|
|
|
|
|
05-21-2006, 06:42 PM
|
#5 |
|
Member (3 bit)
Join Date: May 2006
Posts: 6
|
everything worked fine except nothing showed up on the monitor
|
|
|
|
|
05-21-2006, 07:17 PM
|
#6 |
|
Member (10 bit)
Join Date: Mar 2006
Location: Toronto, Canada
Posts: 810
|
Do you have all of the required power connectors plugged in? That is, a twenty (or twenty-four) pin ATX connector, plus the alternate 12V connector (a 2x2 square block). The alternate connector can be located somewhere near the CPU.
Please also post your system specifications, so that others can help you. Best of luck! |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
