Random Cord HELP!

[Musicmata7]

I have a Rosewill TU-155 case. There are ports on the front panel. All cables are labels accept for one. it is a connector that has two wires,one blue and one white. it looks like 4 should be going through the connector but only two wires go to it. There is also another blue and white cord but that one is labeled. I have no idea where to connect it. The instructions are limited. I think its a reset or type of power connector at first but those connectors are labeled. HELP!

[FLG]

Im gonna guess its the internal speaker wire. If its not, name the wires that are labled.

[Cricket]

What are the wires connected to?

Cricket

[jayb1234]

The online version of the manual(what a joke 2.6Mb and probably 99% of that is the pretty rosewill logo on the first page) has one of the leads relabeled to blue/white for the power led, and shows the other blue/white as being the reset switch.

Also the included psu is only a 20 pin atx.That might be a problem, depending on what your other parts are.

[Musicmata7]

The speaker wires is labeled, the hdd led, reset switch and power switch, i [U]Think[U] It might be the power LED, bit i dont know. It only has 2 wires going to it. Also, upon further inspection. My big fan, on the back wall just under the power supply has 2 4 pin adapters. One goes from the fan to an adapter and another 4 wires goes from that adapter to another. How do i decifer this? Also, how do i know exactly what wires go where from the power supply. YES these are more newb questions, but i gotta figure it out and my case doesn't supply very adequate directions.

[Musicmata7]

also, if any of this helps, like i said i have a TU-155 rosewill case and a 661FM2-LSR MSI motherboard

[Musicmata7]

THanks for that manual JayB, it is the Power LED but there is still one more thing to figure out. where do I put this blue and white wire. I have to assume that it goes to the power supply because that's the only spot where these 4 wire connectors are. Can i use a "peripheral connector" for it? It seems as if those are reserved for things like CD and maybe that's where my Rear fan goes too, idk so how do i figure this out?

[suitcase]

It seems the connector should go on the motherboard. The MB should have pins labled Power LED. Probably labled + and -. I think it's just the little light on the front of the case telling you the pc is on.

[seanarmenta]

so far all the cases i've used in builds designate a blue/white for reset switches.