|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
07-13-2006, 11:38 PM
|
#1 |
|
Member (2 bit)
Join Date: Jul 2006
Posts: 2
|
Searching For Ide Drives . . .
I Resently Started To Build Computers For Me And My Friends. This Computer That Im Having Trouble With Starts The Bios Post, Checks Memory Ok, Then Gets Really Slow When It Is Searching System For Ide Drives . . . It Will Not Continue. I Don't Get Any Bips Replased Cables On All Drives, Checked Power Lines And Nothing. This Is The First Time I Get This Message And I Run Out Of Options As I See It Can I Get Some Pointers From The Experts ?
Thank You. |
|
|
|
07-13-2006, 11:40 PM
|
#2 |
|
9mm wins.
Join Date: Dec 2002
Location: Behind my Glock 34.
Posts: 4,544
|
Make sure that the drives are jumpered correctly and the cables are attached securely at both ends. I have worked with some computers where if you have a single HDD, you have to jumper it as single. Otherwise set them to CS (Cable Select) or Master and Slave, whatever you prefer to work with I guess.
Last edited by minsonngo; 07-13-2006 at 11:42 PM. |
|
|
|
|
07-15-2006, 10:26 PM
|
#3 |
|
9mm wins.
Join Date: Dec 2002
Location: Behind my Glock 34.
Posts: 4,544
|
Have you also tried another IDE or SATA cable? If your working with SATA, don't worry about setting the jumpers.
What is the setup of the system? |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
