|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
08-22-2006, 12:23 PM
|
#1 |
|
Member (2 bit)
Join Date: Aug 2006
Posts: 3
|
New build raid and XP problems
Do SATA drives need to be formated? How? I am assuming that this is why XP will not load.
At this point the computer gives me 4 options: 1. Make ULi 32/64 bit RAID Driver Disk. I have made this disk but don't know what to do with it nor know if I should do anything with it. 2. Quick Format Floppy Disk. works 3. Normal Format Floppy Disk. works 4. FreeDOS command prompt. This goes to a DOS command prompt. Please choose 1`4: Please fill me in! Thanks. The new build is a ASUS P5RD1-VM, 2-512MB PC3200 crucial ballistix, P4 650 3.4G, SATA2 WD2500KS 16M Western Digital. 2 of these set up as a mirror, Enermax 485W Noisetaker, Lite On super all write DVD burner IDE, Sony DVD dual layer burner IDE, An old HP 3.5 floppy. Last edited by newasusbuilder; 08-22-2006 at 01:00 PM. |
|
|
|
08-22-2006, 01:02 PM
|
#2 |
|
Member (12 bit)
Join Date: Sep 2005
Posts: 2,509
|
Make the driver floppy on another machine, and pop it in at the F6 to load 3rd party drivers prompt.
|
|
|
|
|
08-22-2006, 01:07 PM
|
#3 |
|
Member (2 bit)
Join Date: Aug 2006
Posts: 3
|
Where is the 3rd party drivers prompt?
|
|
|
|
|
08-22-2006, 01:58 PM
|
#4 |
|
Member (12 bit)
Join Date: Sep 2005
Posts: 2,509
|
On the screen before Welcome to Setup. See this guide.
|
|
|
|
|
08-22-2006, 06:16 PM
|
#5 |
|
Member (2 bit)
Join Date: Aug 2006
Posts: 3
|
Thanks
Very nice! Thanks for the help!
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
