|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (2 bit)
Join Date: Aug 2006
Posts: 3
|
Power Issue
The power button for my PC case has numerous wires coming from it. I know that these are supposed to connect to the motherboard, but I dont know in what particular order. I have no documentation for the motherboard, for it comes from a pile of spare parts. Could some please assist me?
J. Myshko |
|
|
|
|
|
#2 |
|
Member (12 bit)
Join Date: Sep 2005
Posts: 2,509
|
What specific brand and model are the motherboard and case?
|
|
|
|
|
|
#3 |
|
Member (2 bit)
Join Date: Aug 2006
Posts: 3
|
I have absolutely now clue for either the motherboard or case. Everything was just from spare parts.
|
|
|
|
|
|
#4 |
|
Wrench Bender
Join Date: Dec 2002
Location: Plymouth,MN
Posts: 5,961
|
Take a close look at the mother board in one of the corners there should be a row of pins. This will be the case connection header and on most mobos they will be silkscreened what the pins are for. Same goes for the case leads, there should be some writing on the connectors as to what they do: HD LED/PWR LED/PWR/SPKR/RST.
__________________
"When sliding down the banister of life; look out for splinters pointing up."
|
|
|
|
|
|
#5 |
|
Member (2 bit)
Join Date: Aug 2006
Posts: 3
|
On those row of pins, does it matter where I put the connectors?
|
|
|
|
|
|
#6 |
|
Member (11 bit)
|
Yes. Can you please look at the mobo for any kind of name or numbers so we can identify it and find a manual you can look at.
__________________
Xaser III AMD 2400+ (no time to mess around with OC'ing) Abit NF7-S 420w Enermax Noisetaker Radeon 9800 PRO 80g Seagate 60g Westarn Digital 512 megs OCZ Enhanced latency PC3200 2-2-2-3 Swiftech MCP-650 Swiftech 6002A And a Transmission cooler Temps- 28C idle and load even @1.8v Pics- (the first 6 are new ones) http://photobucket.com/albums/v231/-FLG-/ |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|