Go Back   PCMech Forums > Help & Discussion > Build Your Own PC

Need Some Help? Type Your Keywords Here:

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 09-29-2006, 02:15 PM   #1
Member (8 bit)
 
Join Date: Jan 2002
Location: Southeast MI
Posts: 247
Help needed on a new build

Hi all, I am building my fourth computer and since I have some very specific needs I thought I would seek the opinions of those on the forum with much more experience. so far I only have the case and some parts from a top of the line desktop I built three years ago. I will be using this PC as a personal video recorder and player of Hi Def and regular analog and digital TV shows. The requirements aI have are as follows:

1) it must be very quiet. Power supply, hard drives, case and processor fans etc.

2) it must have an Intel motherboard or other very dependable and trouble free board having Intel chipsets. ATX form factor.

3)it must have an intel processor/heatsink/fan that is cool running yet over 3.0 GHz.

4) it must have up to date motherboard features so I will not need to replace it for at least a few years.

The parts I have are:

A Zalman HD 160 silver case. (new).
An Intel D875PBZ motherboard with P4 3.0 processor and 1 gig of ddr400 sdram. (used)

I hesitate to use the 3.0 because currently it has an extremely loud whine from the processor fan which is irritating. I think the motherboard and processor are now a little dated, but I would very much appreciate any advice or suggestions. I really am just looking for a reliable powerful, quiet, and low maintenance PC that will handle my needs for the next 2 or three years.

Thanks for your help.
jayscott is offline   Reply With Quote
Old 09-29-2006, 02:30 PM   #2
Kickin' it
Staff
Premium Member
 
Alaron's Avatar
 
Join Date: Jan 2002
Location: USA
Posts: 7,723
Send a message via AIM to Alaron
Do you want to use the previous parts or is a whole new system an option?

What is your budget? And does that include the computer only or do you need any peripherals or OS?
Alaron is offline   Reply With Quote
Old 09-29-2006, 07:50 PM   #3
Member (11 bit)
 
chuck4456's Avatar
 
Join Date: Jun 2006
Location: eastern nc
Posts: 1,349
You don't necessarily need the 3.0GHZ+ requirement. Depending on your budget, A C2D is currently the best option. Just about any C2D config is going to be up-to-date (no doubt) and remain so for quite a while.
chuck4456 is offline   Reply With Quote
Old 09-29-2006, 10:05 PM   #4
Member (8 bit)
 
Join Date: Jan 2002
Location: Southeast MI
Posts: 247
I would be glad to get a new MOBO and PSU if I could be certain that it would be top quality and also quiet and powerful. I went top of the line with the 3.0 processor in 2003 with a Thermaltake case, but never really liked the build because of the noise issue from the processor fan. Supposedly the Zalman HD 160 is super quiet and great for a HTPC.

I really would only consider Intel MOBO's or Asus with Intel chipsets.
For the power supply I have been leaning toward the Zalman 400W but will also consider other quiet dependable power supplies. For hard drives I have a couple 250G WD drives but from my own experience I think Maxtor may be just as good and slightly quieter. I woudl prefer the processor to be over 3 Ghz due to video editing and DVD rendering which require the processsing power.
jayscott is offline   Reply With Quote
Old 09-29-2006, 10:32 PM   #5
Kickin' it
Staff
Premium Member
 
Alaron's Avatar
 
Join Date: Jan 2002
Location: USA
Posts: 7,723
Send a message via AIM to Alaron
The Core 2 Duo has a new architecture compared to the older Pentium 4s. Clock speeds are no longer the sole determinant of power. The 1.86 Ghz E6300 will smoke a 3.0+Ghz P4. And it runs cooler and quieter. It is the way to go right now.
Alaron is offline   Reply With Quote
Old 09-29-2006, 10:45 PM   #6
V12
 
Mr.Ferrari's Avatar
 
Join Date: Dec 2005
Location: Houston, T.E.X.A.S
Posts: 3,488
Send a message via AIM to Mr.Ferrari
And I highly suggest a seasonic psu for quiet. Very well built, highly efficient and extremely quiet.

And for the hdd, I find seagate's the most quietest.

Also pick a ati card for those purposes due to their better video capabilities.
__________________
“We must not let ourselves get driven off course, no matter what happens we must stick to our natural game”
-Zenedine Zidane

Last edited by Mr.Ferrari; 09-29-2006 at 10:48 PM.
Mr.Ferrari is offline   Reply With Quote
Old 09-30-2006, 09:44 AM   #7
glc
Forum Administrator
Staff
Premium Member
 
glc's Avatar
 
Join Date: May 2000
Location: Joplin MO
Posts: 37,765
For a C2D, the Asus P5B Deluxe is a good choice - it has a passive heatpipe Northbridge cooler. So does the P5W DH, but it's more expensive.
glc is offline   Reply With Quote
Old 09-30-2006, 03:21 PM   #8
Techphile.
 
David M's Avatar
 
Join Date: Nov 2003
Location: San Francisco Bay
Posts: 5,959
Your's is obviously going to be an entertainment computer. Do you want a case more suitable for an entertainment center? Tower cases stick out like sore thumbs. Is the below type of case more suitable? Since these cases are meant for entertainment systems, they are designed to be quiet from the beginning. Entertainment center computers don't need all the high end components that require all the noisy cooling fans you find on a high end gaming computer. Make sure your fans are nothing less than 12cm in size....they have the highest airflow/noise ratio.

http://www.silverstonetek.com/products-lc13.htm
__________________
Asus P8P67 WS Revolution | Intel 2600K @ 4.7 GHz | Win 7 Pro 64 |8 gigs Corsair 1600 | Two Diamond 6990's in Crossfire| Corsair AX1200 | Thermalright Silver Arrow | Western Digital Black 2TB 64 meg cache | Lian-Li PC-A71B | Logitec Z-5500 | Three Asus 26" VW266H monitors running under Eyefinity |

Last edited by David M; 09-30-2006 at 03:31 PM.
David M is online now   Reply With Quote
Old 09-30-2006, 11:02 PM   #9
Not so new
 
newbuilder14's Avatar
 
Join Date: Aug 2006
Location: Maryland, United States
Posts: 2,576
Send a message via AIM to newbuilder14
^ Isn't that just like a 4U rackmount server?
__________________
“To me there are three things everyone should do every day. Number one is laugh. Number two is think -- spend some time in thought. Number three, you should have your emotions move you to tears. If you laugh, think and cry, that's a heck of a day.” - Jim Valvano
newbuilder14 is offline   Reply With Quote
Old 09-30-2006, 11:05 PM   #10
Member (8 bit)
 
Join Date: Jan 2002
Location: Southeast MI
Posts: 247
The Zalman HD 160 is a HTPC case similar to those suggested, not a tower. I am considering the Seasonic or Zalman power supply.

For the processor, I will need quite a bit of processor power to display the High def TV image without flicker or artifacts. How fast a dual core processor could I get before needing cooling fans that create extra noise. As long as the processing power is above that of the P4 3.0 I am used to I with less noise I will be happy.

I am not at all sure about the video card I need to display Hi Def TV on a computer monitor. For dispalying High Def TV to the Television the My Hd card will be used. Has anyone dispalyed HDTV on their monitor. Please advise.

Thanks for all the suggestions
jayscott is offline   Reply With Quote
Old 10-01-2006, 12:31 AM   #11
V12
 
Mr.Ferrari's Avatar
 
Join Date: Dec 2005
Location: Houston, T.E.X.A.S
Posts: 3,488
Send a message via AIM to Mr.Ferrari
Any one of those c2d's would do awesome as far as that goes. The cooling fan noise depends on how sensitive your ears are. Usually the stock heatsink is not that loud but to some it is.

My opinion is that it should be less noisey due to c2d being cooler. If your still not satisified you might wanna look into a aftermarket heatsink. Albiet you will void your warranty with intel.
Mr.Ferrari is offline   Reply With Quote
Old 10-01-2006, 09:44 AM   #12
glc
Forum Administrator
Staff
Premium Member
 
glc's Avatar
 
Join Date: May 2000
Location: Joplin MO
Posts: 37,765
If you are going to buy a C2D and use an aftermarket heatsink, buy an OEM processor from a vendor that gives you a reasonable DOA warranty - at least 30 days, but I've seen up to a year offered.
glc is offline   Reply With Quote
Old 10-01-2006, 09:46 AM   #13
Techphile.
 
David M's Avatar
 
Join Date: Nov 2003
Location: San Francisco Bay
Posts: 5,959
Quote:
Originally Posted by newbuilder14
^ Isn't that just like a 4U rackmount server?
They do not mount on a rack. They are standalone and are very much like a receiver cabinet...yet made for mounting a motherboard, PSU etc internally.
David M is online now   Reply With Quote
Reply

Bookmarks

Still Need Help? Type Your Keywords Here:


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
My first build... advice needed please dantis Build Your Own PC 5 02-18-2006 11:48 AM
(very)Early stages of a newb build JonM1211 Build Your Own PC 7 01-18-2006 10:13 AM
First Build: Advice Needed wanbli Build Your Own PC 10 11-15-2005 11:51 PM
Opinions needed on Build List SRGONE Computer Hardware 2 05-11-2004 10:10 AM
Second build, memory help needed!! Stubby Computer Hardware 7 01-02-2002 03:41 PM


All times are GMT -5. The time now is 11:20 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 PL2