Back In Action

[chuck4456]

My E6300 build is back in action! Talk about revisions! I had to check and double check to be sure that it was the same board! All the little gazingies are a different color, some of the locations of the plugs and sensors are completely rearranged - even the board itself is a darker color ! I wish now that I had taken before - after pictures to post, but the thought of such an extreme modification never crossed my mind ! I'm getting ready to button it all up. Post later. By the way, I performed the OOC test prior to reinstallation. Standard Procedure these days!

[glc]

Chuck, please check your private messages.

[chuck4456]

Roger GLC. I've had the tendancy to skim a few things and shoot from the hip periodically. I will focus on more thorough interpretations from now on. I love this stuff. Sorry. My CPU temp is 35C - constant. Under load (Sandra & 3D 06 demo) goes to 39C. Back down to 35C afterwards. Using stock heatsink & fan. Last checked Core Voltage about 5 minutes ago: 1.212 V. It was never less than 1.31 V on the first board. Actually, it ran 1.44 V under load (first board that is) and CPU temps ran 48C to as high as 60C. I feel like I have a good board revision.

[glc]

Please reply to the private message as a private message and we can discuss things, do not bring these issues out into the forums. I have more to say to you and wish to keep it private.