|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (5 bit)
Join Date: Nov 2006
Location: Scottsdale, Arizona
Posts: 21
|
Trying to install OS -- won't boot from DVDRW
Well I'm making good progress with my new build but I've hit a new roadblock. The subject says it all. The bios sees both DVD drives and the hard drive and the DVDRW is set first in the boot order (and it is the master). The LED on the DVDRW comes on occassionally, but unless this Liteon drive is the quietest in the world, it seems that it is not spinning at all. I've also tried disconnecting the DVD-ROM and the HDD just to see what would happen -- no luck. I've also tried clearing the CMOS -- also no luck. I've read a number of very similar posts throughout the forums and I'm having some of the same symptoms and tried all the fixes I can find with no luck. Any ideas?
Thanks! Mobo Asus P5W DH Deluxe CPU Intel Intel Core 2 Duo E6700 Conroe 2.66GHz 4M sharing L2 Cache LGA 775 Processor HDD1 Western Digital Raptor WD1500ADFD 150GB 10,000 RPM 16MB Cache Serial ATA150 RAM Corsair XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel DVD1 LITE-ON Black 16X DVD-ROM 48X CD-ROM ATAPI/E-IDE DVD-ROM Drive Model SHD-16P1S DVD2 LITE-ON Black 16X DVD+R 8X DVD+RW 8X DVD+R DL 16X DVD-R 6X DVD-RW 16X DVD-ROM 48X CD-R 24X CD-RW 48X CD-ROM 2M Cache ATAPI/E-IDE 16X DVD Burner |
|
|
|
|
|
#2 |
|
Not so new
|
How did you clear the CMOS? Remove battery, switch jumper temporarily, replace jumper, and insert battery again. If that didn't work, you may have bad RAM, that happened to me...
__________________
“To me there are three things everyone should do every day. Number one is laugh. Number two is think -- spend some time in thought. Number three, you should have your emotions move you to tears. If you laugh, think and cry, that's a heck of a day.” - Jim Valvano |
|
|
|
|
|
#3 |
|
EGO MY LEGO
|
__________________
_______________________________________________________________________ Inspirion 8600/centrino 1.6ghz/1024mb ram/80gb hard drive hitachi/intel pro wireless 2200bg/15.4sxga/Ati 128mb Radeon Mobility 9600/xp pro w/sp2 dimension 4700/P4 2.8ghz 800mhz FSB/1.5 ddr2 ram PC 3200/2X160gb sata maxtor 8mb cache RAID 1/19 in dell flat panel/windows server 2003 Small Business Server standard edition SP1 w/Exchange SP2 |
|
|
|
|
|
#4 |
|
Member (5 bit)
Join Date: Nov 2006
Location: Scottsdale, Arizona
Posts: 21
|
Good news...the memtest passed with no errors! And then I figured out what I was doing wrong...but I can't bear the shame of sharing it (it might have something to do with trying to install Windows using the wrong CD though). DOH!!
I'm really not that stupid...I promise. Thanks for the suggestions along the way. hawkeye |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Boot from Atapi CD-Rom Failure | EDB | Computer Hardware | 9 | 02-25-2005 11:12 PM |
| I/O Errors trying to install OS | bondservant | Computer Hardware | 4 | 08-26-2003 02:14 AM |
| Dual boot, how do I start each OS in safe mode ? | casey | Computer Hardware | 6 | 07-11-2002 10:46 AM |
| Install Mandrake 8 on dual boot system. | Lmworld | Linux OS and Software Assistance | 17 | 08-25-2001 03:47 AM |
| New OS Install Question | Daddy Rabbit | Windows Legacy Support (XP and earlier) | 1 | 08-23-2001 06:38 AM |