Go Back   PCMech Forums > Help & Discussion > Build Your Own PC

Need Some Help? Type Your Keywords Here:

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 12-31-2006, 11:31 AM   #1
Member (3 bit)
 
Join Date: Dec 2006
Posts: 4
Problem with 1st boot

* AMD 2X 4200
* RAM 2 GB
* ECS motherboard
* Gforce 7900GS video card
* 200 GB HDD Maxtor SATA II
* DVD drive

1st boot up to a: floppy; go into BIOS configure for RAID (SATA enabled) ; BIOS sees the DVD drive and Maxtor HDD. Went into configuration RAID setup as striping; then clear drive; set up as bootable.

when enter c: error with "invalid drive"
when enter b: (i do have win XP install disk in DVD drive)
error with a(abort) , r(retry) ...

tried another DVD drive (now using DVD CD writer combo drive)

Same problem with B:
tried c: , d: e: f: all came back with invalid drive.

Any help would be appreciated.
keithpkp is offline   Reply With Quote
Old 12-31-2006, 11:37 AM   #2
Shiro Usagi
Premium Member
 
Cricket's Avatar
 
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
Are you using a burned copy of WinXP?

Cricket
Cricket is offline   Reply With Quote
Old 12-31-2006, 11:46 AM   #3
Member (3 bit)
 
Join Date: Dec 2006
Posts: 4
XP OEM version; tried another data CD; wanted to see if I can access DVD writer drive. same error abort, fail.. retry. Tried hooking to IDE 1 and then IDE 2 same problem.

DVD Drive is good tried it on HP build system.
b: (abort fail retry...)
c: invalid drive
d: ...
....

I was hoping also to see the Maxtor drive (BIOS RAID configure; I assume when you clear the HDD will format also.
keithpkp is offline   Reply With Quote
Old 12-31-2006, 01:11 PM   #4
Wrench Bender
 
flanzig1's Avatar
 
Join Date: Dec 2002
Location: Plymouth,MN
Posts: 5,961
You need 2 identical HDs to set up a RAID 0.
__________________
"When sliding down the banister of life; look out for splinters pointing up."
flanzig1 is offline   Reply With Quote
Old 01-01-2007, 03:06 PM   #5
glc
Forum Administrator
Staff
Premium Member
 
glc's Avatar
 
Join Date: May 2000
Location: Joplin MO
Posts: 37,765
Single hard drive? Set SATA as IDE, not RAID. Boot with the XP CD, not a floppy.
glc is offline   Reply With Quote
Reply

Bookmarks

Still Need Help? Type Your Keywords Here:


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Boot Problem SevenRavens Build Your Own PC 2 05-31-2006 04:15 PM
Problem during boot up Windows XP ITlover Windows Legacy Support (XP and earlier) 17 12-18-2005 09:45 PM
Problem (cannot boot up) JAYMAN Computer Hardware 2 02-20-2004 07:58 PM
Boot Problem YaZoR Computer Hardware 3 12-17-2001 03:27 PM
Boot problem ssutton Windows Legacy Support (XP and earlier) 5 07-04-2001 12:59 PM


All times are GMT -5. The time now is 12:23 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 PL2