|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
06-29-2007, 01:41 AM
|
#1 |
|
Member (4 bit)
Join Date: Jun 2007
Posts: 11
|
"Detecting array" stall
Nevermind, thats fixed, but i now have another problem..
My pc boots.. but my 2x drives (Dvd rom / dvd burner) dont turn on unless i eject it.. and then it turns off like rite after... help :[ it waits on :Boot from CD: but it doesnt boot.. Last edited by pastel162; 06-29-2007 at 08:57 AM. |
|
|
|
06-29-2007, 09:07 AM
|
#2 |
|
Member (4 bit)
Join Date: Jun 2007
Posts: 11
|
Ok.. do i have a faulty dvd drive? because if i unplug the first dvd rom drive... everything works fine, can someone shed some light? and... my cpu is running awefully hot on idle... 53 Degrees Celcius
Intel 6700 Duo Core processor \w Zalman 9500 |
|
|
|
|
06-29-2007, 12:25 PM
|
#3 |
|
Wx geek
Join Date: Aug 2005
Location: Indiana
Posts: 6,638
|
Are the drives IDE? or SATA? If IDE check the jumper settings on the back of the drive. If you are using an 80wire IDE cable (has fine, thin grooves on the cable) jumpers should be set to Cable Select (CS) and the cable should be marked as to which connector is for master and which is slave. If it's a 40 wire IDE cable (larger coarse grooves) you'll have to set the jumpers to master and slave respectively.
__________________
"It is the way of man to make monsters and it is the nature of monsters to destroy their makers." |
|
|
|
|
06-29-2007, 01:09 PM
|
#4 |
|
Member (4 bit)
Join Date: Jun 2007
Posts: 11
|
the burner is SATA, and it works fine
the dvd rom is IDE, but if i install it it goes into "Detecting Array" |
|
|
|
|
06-29-2007, 02:33 PM
|
#5 |
|
Wx geek
Join Date: Aug 2005
Location: Indiana
Posts: 6,638
|
What motherboard is this? "Detecting Array" sounds like the RAID controller is trying to put the drive into an array. I'm not too familiar with RAID so I'm just going to throw a suggest out there. Try disabling anything in the BIOS setup that has to do with RAID.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Stall on Boot at the win XP logo. | Jim Fish | Computer Hardware | 5 | 10-26-2004 01:55 AM |
| XP Pro install stall | AndyM | Windows Legacy Support (XP and earlier) | 7 | 01-16-2004 08:05 PM |
| sys stall after large delete | ittybitty | Windows Legacy Support (XP and earlier) | 6 | 12-11-2003 10:32 PM |
| CD Rom makes system stall.... | walleymo | Computer Hardware | 2 | 03-23-2002 11:05 AM |
| connection seems to stall | BeanGyy | Internet, Web Applications, & The Cloud | 1 | 02-10-2002 08:16 AM |
Linear Mode
