need panel configuration help

[cat_man_2u]

Need help with panel configeration , my Aopen MX36LE-UN Motherboard died, and im replaceing it with a AOpen MX4BS P4 Motherboard, the panel pin config is diferent, need to know what pins to hook up the PWSW, RS,H.D.D.LED, PWLED,
ANY HELP ?

[Cricket]

Originally Posted by cat_man_2u need to know what pins to hook up the PWSW, RS,H.D.D.LED, PWLED,

PWSW = Power switch or power button
RS = Reset switch or reset button
HDD LED = the hard drive indicator led from the front of the case
PWLED = thte power led from the front of the case

Cricket

[cat_man_2u]

Originally Posted by cat_man_2u Need help with panel configeration , my Aopen MX36LE-UN Motherboard died, and im replaceing it with a AOpen MX4BS P4 Motherboard, the panel pin config is diferent, need to know what pins to hook up the PWSW, RS,H.D.D.LED, PWLED, ANY HELP ?

The MX4BS motherboard, panel does not indicate the pins and instead of 20 pinswith markings there is only 19 pins and no markings as to what plugs where?

[Alaron]

Page 31 of your manual shows the pin layout. You can download it here if you don't have one: http://www.aopen.nl/download.aspx

[cat_man_2u]

Thanks that fixed my problem, along with the 4 pin extra power for the board that i didn't have hooked up, prob solved thanks guys!