new build. no vid no bip. help needed

[markonati]

mb=foxconn 9457gmd (8ks2h) bios by phoenix.
cpu= celeron 420 (1.6 GHZ,512k)
one stick of 1024/667 ram.

crt screen-chacked o.k
hdd spinning
cpu&ps fans spinnig.
reset and power functioning (i can tell by the front panel lights and sound of hdd spinning when i pressing it.)

and still- no video, and no beeps. in the link by highrisemech there is no description for this.
only more than 4....

what can it be?

thanks
nati

sorrey for the lame english...

[pam123]

Hello markonati and welcome to PCMech.

Read this on troubleshooting a new build : http://forum.pcmech.com/showthread.php?t=132409

[shadowpr]

Try this: http://forum.pcmech.com/showthread.php?t=132409

Make sure it's out of the case when you do.


EDIT: I was beaten to the punch...

[Xeross]

Just throwing this in there because it is what I did today. Make sure that 2x2 power connection is hooked up to your motherboard along with the 21pin. I completely noobified and forgot to connect that, allowing for the same issues you are running into. Everything started up fine, spun up, but no video and no beeps.

[GodofCats]

Hey markonati, I'm not that great of a PC mechanic yet, but is the video for this config onboard or are you using something else? Such as AGP, PCI?

I was only asking because I've found that if you don't connect those right, it can really mess things up. Although I don't think this is what you're facing, you never know. The mobo might not be beeping because of the mobo BIOS settings.

Anyway, let us know what happens.

[markonati]

was preformed before i poted this thread.
and yet- no beep, no vid and everything else looks just fine (...)

i think i have the same problem as the guy above me- the mb not support the cpu.
(well if it's correct, you will soon read abaut a supplier in israel was fed a cpu by an angry customer...) i didn't wnt to take this cpu but a "celeron D" which is fully suppported by my mb. he talked me into taking the celeron 420 which is newer by saying that there will be no problem.

and yes, the vga is integrated. so there is no connecting to be done.

thnks again for all yore help.
great forum

nati

[pam123]

I have not been able to find any information on that motherboard even on Foxconn's site.
Would you please double check the full name and model number.

[markonati]

to my mb spe.
(well, it's not much, it costs like 40$ in israel,but for a first build,it's a nice test case...)

http://www.foxconnchannel.com/produc...D=en-us0000231

in an hour i will be calling my supplier and see what he have to say.

i hope he will be as helpfull as you.

so, i'll update when i have news.



thanks
nati

[markonati]

video!
i've never been so happey to here a beep. :-)

it was the cpu. the mb doesn't support it.
it was replased with a celeron d 3.0 ghz 512k.

now it works.stable. well, it's a beet hot (47c deg) but this i can solve.

thank's a lot guys.
i wouldn't got this far without you.

see you on the next build
nati