Go Back   PCMech Forums > Help & Discussion > Build Your Own PC

Need Some Help? Type Your Keywords Here:

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 01-17-2008, 02:09 PM   #1
Member (4 bit)
 
Join Date: Apr 2007
Posts: 14
Problem with newly built Pc!

Hey,

I recently bought a:

Foxconn Socket 775 Intel 64-bit Motherboard,
Intel Pentium D 925 Dual Core Socket 775 Processor,
2 x 1GB DDR2 667 Memory,
ATX 12V 450 watts power supply,

I connected these wires together and put on the CPU fan and heatsink, i then found out there was a 8pin power connector on the motherboard when the PSU only gives a 4pin, i read on other forums that this doesnt matter and it should still work plugged into the 8pin.

So i plugged in the 4pin into the the 8pin connector, and thought i was ready to start it up to test the fans etc, as soon as i turned the power on without pushing the power button on the case, a small red light appeared on the motherboard, just next to the 24pin connector.

I then tried pushing the case power button, nothing happened, the red light just stayed lit, not even the cpu fan turned on!

Any idea on whats wrong? any help would be greatly appreciated
SaMB is offline   Reply With Quote
Old 01-17-2008, 02:12 PM   #2
Shiro Usagi
Premium Member
 
Cricket's Avatar
 
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
What brand power supply are you using?

Is it a ATX 2.0 or higher power supply?

Is the motherboard in the case or do you have it out of the case on a non-conductive surface?

Cricket
Cricket is offline   Reply With Quote
Old 01-17-2008, 02:19 PM   #3
Member (4 bit)
 
Join Date: Apr 2007
Posts: 14
I have put the motherboard inside of the case, the brand is win power i think, and its model 450.

How do i check if its a ATX 2.0 or higher power supply?
SaMB is offline   Reply With Quote
Old 01-17-2008, 02:42 PM   #4
Shiro Usagi
Premium Member
 
Cricket's Avatar
 
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
Does it have a 24 pin motherboard power connector and at least one square 4 pin 12v power connector?

If it's a Win power supply you should consider changing it for something better...Win power supplies are rubbish. Check out this thread.

Cricket
Cricket is offline   Reply With Quote
Old 01-17-2008, 02:58 PM   #5
Member (4 bit)
 
Join Date: Apr 2007
Posts: 14
Yes it has a 24pin, and a 4pin power connector, but the motherboard has a 8pin connector, does this make a difference? or where i plug in the 4pin?

And thanks for the advice il test it with another PSU, is there a possibility any thing else is corrupt like the motherboard, or is it most likely the PSU?
SaMB is offline   Reply With Quote
Old 01-17-2008, 03:04 PM   #6
Shiro Usagi
Premium Member
 
Cricket's Avatar
 
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
Looking at your parts list the thing that sticks out is the power supply...it's a cheap low quality unit and the most likely thing to be DOA or defective.

If the computer does boot up okay with another power supply then you've found the problem, but if computer doesn't boot up then something else may be DOA or defective.

Follow this troubleshooting guide.

Cricket
Cricket is offline   Reply With Quote
Reply

Bookmarks

Still Need Help? Type Your Keywords Here:


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
First PC built problem... JustinRP Build Your Own PC 3 01-07-2006 09:45 PM
Newly Built PC Hitokiri Build Your Own PC 2 11-22-2005 02:47 AM
Newly built PC not working kamikaze worm Computer Hardware 5 08-12-2004 08:02 PM
got a couple of problem with my newly build PC arpsachin2 Computer Hardware 7 06-24-2004 12:11 PM
problem installing o/s on newly built pc speznjast Computer Hardware 18 06-22-2004 12:10 AM


All times are GMT -5. The time now is 09:56 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 PL2