Verifying DMI Pool Data

[Texag02]

I'm new here, I did a search, but couldn't find anything that fixed my problm. Just built a new PC(my first build)... here's the components:

Motherboard: GIGABYTE GA-MA770-DS3 AM2+/AM2 http://www.newegg.com/Product/Produc...82E16813128081"]http://www.newegg.com/Product/Produc...82E16813128081"]http://www.newegg.com/Product/Produc...82E16813128081

Processor: AMD Athlon 64 X2 6400+ Windsor 3.2GHz Socket AM2 http://www.newegg.com/Product/Produc...82E16819103228

Video Card: EVGA 512-P3-N841-A3 GeForce 8800GTS (G92) 512MB http://www.newegg.com/Product/Produc...82E16814130312

RAM: OCZ Platinum 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) http://www.newegg.com/Product/Produc...82E16820227178

Power Supply: Thermaltake toughpower W0117RU ATX12V / EPS12V 750W http://www.newegg.com/Product/Produc...82E16817153036

Hard Drive:HITACHI Deskstar E7K500 ) 500GB 7200 RPM SATA 3.0Gb/s http://www.newegg.com/Product/Produc...82E16822147007

DVD Burner: ASUS 20X DVD±R DVD Burner with LightScribe Black SATA http://www.newegg.com/Product/Produc...82E16827135156

Case: COOLER MASTER RC-690-KKN1-GP http://www.newegg.com/Product/Produc...82E16811119137

Used Arctic Silver on the CPU and Heatsink http://www.newegg.com/Product/Produc...82E16835100012

I turned it on and the first time got asked to put in the install disk, I tried the one that came with the motherboard and it loaded and went to Xpress Recovery2, I hit eter trying to get out of it and the computer told me it couldn't back up and then went back to a screen that said verifying DMI Pool Data, I've restarted several times and keep getting the same thing. The entire screen says:

Pri. Master Disk: None Serial Port(s) :3F8
Pri. Slave Disk: None Parallel Port(s) :378
DDR2 at DIMM :1 3

IDE Channel 2 . Slave Disk HDD S.M.A.R.T. capability .... Disabled

PCI Devices Listing ...
Bus Dev Fun Vendor Device SVID SSID Class Device Class IRQ
0 18 0 1002 4380 1458 B002 0101 Native IDE Cntrlr 11
0 19 0 1002 4387 1458 5004 0C03 USB 1.1 Host Cntrlr 5
0 19 1 1002 4388 1458 5004 0C03 USB 1.1 Host Cntrlr 11
0 19 2 1002 4389 1458 5004 0C03 USB 1.1 Host Cntrlr 10
0 19 3 1002 438A 1458 5004 0C03 USB 1.1 Host Cntrlr 11
0 19 4 1002 438B 1458 5004 0C03 USB 1.1 Host Cntrlr 10
0 19 5 1002 4386 1458 5004 0C03 USB 2.0 Host Cntrlr 3
0 20 0 1002 4385 1458 4385 0C05 SMBus Cntrlr NA
0 20 1 1002 438C 1458 5002 0101 IDE Cntrlr 14
0 20 2 1002 4383 1458 A002 0403 Multimedia Device 5
1 0 0 10DE 0600 3842 C842 0300 Display Cntrlr 10
2 0 0 10EC 8168 1458 E000 0200 Network Cntrlr 10
3 14 0 104C 8024 1458 1000 0C00 IEEE 1394 Host Cntrlr 11
ACPI Controller 9
Verifying DMI Pool Data............

If someone can tell me where to go from here I would really appreciate it.

[TwoRails]

Not sure what you mean with, "... install disk ... came with the motherboard ..." ??

You have to install Widows first, not the mobo utility CD, if that's what you mean. Be sure to set the boot up sequence to your CD first. Also, how many hard drives do you have installed?? Make sure it's only one: then put it one the IDE 1 channel (assuming it's IDE as indicated above) and set it to CS if your are using the proper cable.

[Texag02]

I was having trouble getting into the BIOS last night, tried it again today and it worked fine...I'm typing on the new PC right now.