POST screen not showing up, after I finished build.

[DemonFlame5]

What's wrong, the monitor just stays black. I don't know why the post screen isn't showing up.

[Drunner611]

Well, after running your PS directly into your board through the fan connectors, who knows what damage it caused.

Is it beeping/giving any post codes what so ever? Check to see if your ram is in properly, that's usually my problem.

[DemonFlame5]

The beeping is gone, the computer is working fine now. All the fans are working, the motherboard is working since the CPU fan is running. The LED's are working. The Harddrive is working. Everything is working good.

[Cricket]

So, problem fixed? Congratulatoins! Enjoy your new computer.

Cricket

[DemonFlame5]

Oh no, it isn't, the person who posted was speaking of a problem I was facing in another topic. But the POST problem is still there.

[Cricket]

Originally Posted by DemonFlame5 Oh no, it isn't, the person who posted was speaking of a problem I was facing in another topic. But the POST problem is still there.

Then why did you post this statement?

Originally Posted by DemonFlame5 The beeping is gone, the computer is working fine now. All the fans are working, the motherboard is working since the CPU fan is running. The LED's are working. The Harddrive is working. Everything is working good.

If you're still getting a blank screen at startup then your computer isn't working fine or good.

Follow the troubleshooting instructions found here. You must remove the motherboard from the case when doing this. Let us know what happens.

Cricket