|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-08-2008, 07:57 PM
|
#1 |
|
Member (7 bit)
Join Date: Jul 2005
Posts: 116
|
New Build Will Not Turn On
See this thread for parts: New Build Link
Machine will turn on for 1 second, lights come on for a second but machine does not stay on...no beep, no other sounds, monitor does not show anything either. Antec 900 Case Asus PK5-E MB Totally lost, please help Thanks Chris |
|
|
|
04-08-2008, 08:07 PM
|
#2 |
|
Telcom Tech
Join Date: Feb 2002
Location: Western, Pa.
Posts: 5,409
|
Go to the new build troubleshooting thread and follow the steps therein:
http://forum.pcmech.com/showthread.php?t=132409
__________________
If it ain't broke, "TWEAK IT" |
|
|
|
|
04-08-2008, 08:30 PM
|
#3 |
|
Member (7 bit)
Join Date: Jul 2005
Posts: 116
|
Machine now, has a restart loop, i dont know if there is any beep....i didnt see power for sound.....stays on now about 2-3 seconds.....forgot to plug in the 8-pin connector
|
|
|
|
|
04-08-2008, 08:51 PM
|
#4 |
|
I like me
Join Date: May 2007
Location: Tejas
Posts: 7,332
|
Make sure the heatsink is installed fully.
__________________
It's coming....just you wait. |
|
|
|
|
04-08-2008, 09:17 PM
|
#5 |
|
Member (7 bit)
Join Date: Jul 2005
Posts: 116
|
heat sink must have been the issue....now i cannot detect the HDD....be back in a bit
|
|
|
|
|
04-08-2008, 09:37 PM
|
#6 |
|
Member (7 bit)
Join Date: Jul 2005
Posts: 116
|
ok, no clue....HDD is not being detected, the optical is, but for some reason I cannot find the HDD....is there a master/slave scenario with SATA ????
|
|
|
|
|
04-09-2008, 07:14 AM
|
#7 |
|
Member (9 bit)
Join Date: Jan 2008
Location: Albany, NY
Posts: 407
|
I have an ASUS board and the board stinks trying to see SATA drives. When I take the thing apart I know that I will have a nightmare trying to get the system to see the drives. What I do is to try to power on and if it doesn't see the drive plug it into another connector and reboot. after a couple of tries something changes and it sees the drives. try unplugging the DVD and get the HDD recognized then add the DVD back in.
__________________
COOLER MASTER COSMOS 1000 M4A79T Pro ATI 5770 AMD Phenom II X4 955 BLack Edition COOLER MASTER 120mm Sleeve CPU Cooler 4gig Corsair Dominator PC Power & Cooling Silencer 750 Quad Power Supply Seagate 640 gig and 500 gig SATA in NAS drive 1T WD HDD system drive-DVD burner |
|
|
|
|
04-09-2008, 08:02 AM
|
#8 |
|
Member (7 bit)
Join Date: Jul 2005
Posts: 116
|
I did that too...removed the DVD, put the HDD in every SATA and it does not detect it....It did show up in the SATA 1 in the BIOS for a second, but it showed as 0MB, I hope its not a dead HDD.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New build won't turn on | HeartSkullKid | Build Your Own PC | 12 | 08-11-2006 12:39 AM |
| I'm stuck - New Build Won't Turn On | MGGuy | Build Your Own PC | 6 | 05-04-2006 09:19 PM |
| AMD PC Build; Budget $1000 | Technique | Build Your Own PC | 5 | 04-04-2006 03:58 PM |
| Photoshop Powerhouse Build | Atomic440 | Build Your Own PC | 9 | 04-02-2006 05:43 PM |
| Build wont turn back on! | inflames988 | Computer Hardware | 5 | 08-20-2004 01:53 PM |
Linear Mode
