|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
11-28-2008, 04:10 AM
|
#1 |
|
Member (1 bit)
Join Date: Nov 2008
Posts: 1
|
not powering on
After i was finished building the computer when i press the power button i get a few seconds of recognition from my fan and cooler but then it stops. this is my first build so is there something i need to check wire-wise?
here are specs case: http://www.newegg.com/Product/Produc...82E16811119115 mb: http://www.newegg.com/Product/Produc...82E16813131296 cpu:http://www.newegg.com/Product/Produc...82E16819116072 ps: http://www.newegg.com/Product/Produc...82E16817139003 gc: http://www.newegg.com/Product/Produc...82E16814161235 Is there some wire or something i could have missed? |
|
|
|
11-28-2008, 07:03 AM
|
#2 |
|
Member (12 bit)
Join Date: Jul 2002
Location: Illinois
Posts: 3,557
|
The best solution is here: http://forum.pcmech.com/showthread.php?t=132409
Do you get any "beeps" from the MOBO? |
|
|
|
|
11-29-2008, 03:01 AM
|
#3 |
|
9mm wins.
Join Date: Dec 2002
Location: Behind my Glock 34.
Posts: 4,544
|
Double check and make sure you have the CPU heatsink/fan installed securely as it should be.
Make sure nothing is shorting out the motherboard. And make sure you have the 6-pin power supply connector hooked up to the video card. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
