|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
03-13-2009, 02:02 PM
|
#1 |
|
Member (7 bit)
Join Date: Nov 2007
Posts: 121
|
No Signal
Hi guys, I am building a pc for someone and after I set it up, turn it on, the LCD monitor just displays: "No signal, check video cable"
I have the blue VGA cable connected to the back of the monitor and it plugs into the vga slot on the back I/O panel of my motherboard. My motherboard is http://www.newegg.com/Product/Produc...82E16813186140 it has onboard video, and I am using a modular 530 W Raidmax power supply... could this be the problem? Since it is onboard, do I need to plug in anything else? No right? I would assume I just leave the PCI-E plugs alone... Everything seems likes it is in, any ideas? |
|
|
|
03-13-2009, 02:40 PM
|
#2 |
|
Member (9 bit)
Join Date: Sep 2008
Location: UK
Posts: 443
|
well if you say everything is seated properly, then it might be the PSU.
Look at this list of Quality PSU's: What Power Supply should I get? How many Watts? Who made it? Guide Inside |
|
|
|
|
03-13-2009, 03:08 PM
|
#3 |
|
Member (7 bit)
Join Date: Nov 2007
Posts: 121
|
I fixed it, I had one of the wires in loose, atleast it wasn't a huge problem.
 Thanks for the quick reply! |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
