|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
06-11-2009, 12:50 PM
|
#1 |
|
Member (5 bit)
Join Date: Nov 2005
Posts: 26
|
First build problems
Okay my build is all together and I fired it up only to be hanging on the (Verifying dmi pool data screen).I went in and set my cd/dvd to boot first and I have also swapped out my dvd drive and taken the battery out of the mb for reset.It is still hanging up but now I have a (boot from cd/dvd) below the verifying message.I really dont know what is going and I need some guidance to get this pc up and running.
Amd kuma 2.8 Gigabyte ga-ma78gm mb 4 gigs G=skill ram WD 320 gig Hd Samsung dvd burner Gigabyte case Fsp atx350 psu |
|
|
|
06-11-2009, 01:35 PM
|
#2 |
|
Member (11 bit)
Join Date: Feb 2005
Location: tfp
Posts: 1,923
|
Have you tried this? http://forum.pcmech.com/showthread.php?t=168456
__________________
System: ASUS A8N32-SLI Deluxe AMD Opteron Denmark 165 Sapphire Radeon 4850x2 2X1GB G.Skill DDR400 Ram Corsair 850W PSU Thermaltake Soprano case Seagate 7200.10 320GB |
|
|
|
|
06-11-2009, 02:38 PM
|
#3 |
|
Member (5 bit)
Join Date: Nov 2005
Posts: 26
|
I read this but am saving for a last resort.
|
|
|
|
|
06-11-2009, 05:08 PM
|
#4 |
|
Member (11 bit)
Join Date: Feb 2005
Location: tfp
Posts: 1,923
|
The only way to figure out why a brand-new build won't power on is to take it out of the case and strip it down to bare-bones components. This will eliminate the possibility of shorting in the case, or other miscellaneous problems, all of which have the same symptom: "it doesn't start."
|
|
|
|
|
06-12-2009, 07:56 PM
|
#5 |
|
Member (5 bit)
Join Date: Nov 2005
Posts: 26
|
The pc will power up fine it just wont go all the way thru the bootup process.
|
|
|
|
|
06-12-2009, 08:31 PM
|
#6 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 37,767
|
When you see the (boot from cd/dvd) press the enter key.
|
|
|
|
|
06-12-2009, 09:04 PM
|
#7 |
|
Member (5 bit)
Join Date: Nov 2005
Posts: 26
|
It still wont boot up !! It gets to the verifying dmi pool data screen and thats where it stops.
|
|
|
|
|
06-21-2009, 05:15 PM
|
#8 |
|
Member (5 bit)
Join Date: Nov 2005
Posts: 26
|
Amd Build
Okay I started this build about 2 weeks ago and when I got ready to install the Os I was hanging up on the verifying dmi pool data screen.I rma my hard drive and power supply and now when I boot up and try to install Xp I get the error message
(Inf file txtsetup.sif is corrupt or missing,status 32768 setup can not continue)This is really becoming a nitemare and I need help to get this pc up and running. Amd Athlon X2 Kuma 2.8 dual core G-skill pc2 6400 ram 4 gigs Hitachi 500g hard drive Gigabyte ga-ma78gm motherboard Samsung dvd burner Gigabyte case Antec 500w psu |
|
|
|
|
06-21-2009, 05:57 PM
|
#9 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 37,767
|
Threads merged, please do not start new threads on the same issues.
Your operating system CD/DVD could be defective. Your CD/DVD drive could be defective. Your ram could be defective. Your motherboard could be defective. What made you think your PSU and hard drive were bad? |
|
|
|
|
06-21-2009, 10:57 PM
|
#10 |
|
Member (5 bit)
Join Date: Nov 2005
Posts: 26
|
I was stuck at the verifying dmi pool data screen until I changed out my psu and hd.My os is xp pro and it is brand new.I have also switched drives and that is not the problem.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
