|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
06-10-2004, 06:08 PM
|
#1 |
|
Member (7 bit)
Join Date: Dec 2003
Location: Lawrence, KS
Posts: 71
 |
Onboard Audio Problem
Im having problems with my Onboard Audio Device on my ASUS P4C800 Deluxe motherboard. MY speakers are the Creative Inspire 2900 2.1 Speaker setup. Now when i plug my speakers into the proper hole(green one) i get no sound, but when i plug it into my pink hole i get subwoofer sound. Its meant for the center/subwoofer to be plugged into it, but i only have on plug. How do i manage to get my speakers to work along with my sub?
|
|
|
|
06-10-2004, 06:36 PM
|
#2 |
|
Member (9 bit)
Join Date: Apr 2004
Location: Woburn, MA
Posts: 402
|
well with a 2.1 setup only one plug in is required, which ure rite, the green hole, check in control panel/sounds and audio devices then click on advanced and make sure ure speaker setup is on desktop stereo speakers, also make sure all ure drivers are working properlyand of course all cords are securly plugged in
|
|
|
|
|
06-11-2004, 09:25 AM
|
#3 |
|
Member (10 bit)
Join Date: Mar 2004
Location: Essex, UK
Posts: 982
 |
Check in the BIOS to make sure onboard audio is enabled, are the drivers installed properly. As you Hags said it should connect to the green jack connector.
__________________
Intel Core i7 920 2.66GHz | Asus P6T SE| 6GB Corsair ram | XFX Radeon HD 4780 | 2 x 250 Gb Maxtor SATA II (in RAID 0), 1 x 250GB SATA II | Creative XFI soundcard | Coolermaster 650W PSU | ThermalTake Tsunami case My new website -Carp Fishing Forums |
|
|
|
|
06-11-2004, 02:20 PM
|
#4 |
|
Computing Professor
Staff
Premium Member
Join Date: Jun 2001
Posts: 11,718
|
Even more check your manual.
Chapter 5 has the set-up wizard for your sound system. I know there's one that only works for 4.1 and 6.1 setups and if that's enabled you would have trouble. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
