|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
06-16-2004, 03:37 PM
|
#1 |
|
Member (6 bit)
Join Date: Dec 2002
Posts: 46
|
cpu settings
I am installing a pentium 4 processer 2.8ghz with a 533mhz front side bus with a 512k cache. could anyone tell me what the bus frequencey,the cpu multiplier, and the vcore voltage should be set at in the cmos?
|
|
|
|
06-16-2004, 03:51 PM
|
#2 |
|
Resident Intel Fanboy
Join Date: Mar 2004
Location: Cincinnati
Posts: 1,669
|
FSB will be 133, multiplier cannot be changed on intel cpu's anymore, vcore should be auto set by your board (all these settings should) what motherboard are you using?
__________________
...wide is the gate, and broad is the way, that leadeth to destruction, and many there be which go in thereat... |
|
|
|
|
06-16-2004, 04:01 PM
|
#3 |
|
Member (6 bit)
Join Date: Dec 2002
Posts: 46
|
I am using a soyo p4x400 dragon lite.
|
|
|
|
|
06-16-2004, 04:37 PM
|
#4 |
|
Red-eyed Moderator
Staff
Premium Member
Join Date: Dec 1999
Location: Regina, Saskatchewan, Canada
Posts: 17,525
|
533Mhz which is 133x4, but to be at 2.8Ghz you have a 21x multiplier... vcore will be stamped on the top of the CPU.
__________________
-At Ford, quality is job #1, job #2 is making them explode. ~Norm MacDonald, SNL News -Switching to Glide..Balancing in my head..inside of me... taking the glide path instead. |
|
|
|
|
06-16-2004, 05:20 PM
|
#5 |
|
Member (12 bit)
Join Date: Oct 2003
Location: Manchester, UK
Posts: 2,374
|
Don't worry about vcore, it will auto detect in the BIOS. You shouldn't even need to touch the FSB setting, as that is usually auto detected too.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
