|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
06-17-2004, 08:20 AM
|
#1 |
|
Member (7 bit)
Join Date: May 2004
Location: Cha Am, Thailand
Posts: 101
|
What have I got....ATA 66/100/133??
I read that if you have a hard drive over 10 gig, then you would have a ATA 66/100 drive....possibly.
I have 2 drives, a 20 gig and a 40 gig drive but how do I know what type they are? I have just looked at the cable connecting them, and it isn't the 80wire/40pin connector. |
|
|
|
06-17-2004, 08:44 AM
|
#2 |
|
Member (14 bit)
Join Date: Feb 2000
Location: Offenbach/Main (Germany)
Posts: 8,485
 |
It should be written on it. Anyway, you can look at the model number and do an internet search. The specs are online.
RJ
__________________
All's right with the world when your PC is working right. 
|
|
|
|
|
06-17-2004, 10:39 AM
|
#3 |
|
Member (9 bit)
Join Date: Jul 2003
Location: Sheffield, UK
Posts: 286
|
does it matter if i get another dirve that isnt the same ata spec as my current drive?
|
|
|
|
|
06-17-2004, 10:58 AM
|
#4 |
|
Red-eyed Moderator
Staff
Premium Member
Join Date: Dec 1999
Location: Regina, Saskatchewan, Canada
Posts: 17,525
|
No
__________________
-At Ford, quality is job #1, job #2 is making them explode. ~Norm MacDonald, SNL News -Switching to Glide..Balancing in my head..inside of me... taking the glide path instead. |
|
|
|
|
06-17-2004, 11:00 AM
|
#5 |
|
Member (14 bit)
Join Date: Feb 2000
Location: Offenbach/Main (Germany)
Posts: 8,485
|
You mean, like having e.g. an ATA 66 and ATA 100 on the same cable ?
No. A good IDE controller can handle it. A bad IDE controller will use the lowest of the two (in this case ATA66) for both. But you will always be able to use both devices. Just make sure that you use the 80 ribbon cable for drives that are ATA66 and above, or they'll be limited to ATA33. ATA33 will also work on ATA66 (and above) cables. RJ |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
