|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
03-16-2001, 09:39 AM
|
#1 |
|
Member (1 bit)
Join Date: Mar 2001
Posts: 1
|
I'm at the point in my assembly where I'm trying to load the OS, but I keep getting the message that Win 95 cannot be installed due to an error detected while formatting the prim. hd partition. I tried to do format c:/s, but I got the message 'invalid device parameters from device drivers'. What gives? Is the hd fried?
|
|
|
|
03-16-2001, 10:08 AM
|
#2 |
|
Red-eyed Moderator
Staff
Premium Member
Join Date: Dec 1999
Location: Regina, Saskatchewan, Canada
Posts: 17,525
|
I assume that you ran FDISK on the drive first. Does it start the format, then give the error or does it spit out the error right away? Did you autodetect the drive in the BIOS and what did it detect as, it may be running with the wrong drive parameters.
__________________
-At Ford, quality is job #1, job #2 is making them explode. ~Norm MacDonald, SNL News -Switching to Glide..Balancing in my head..inside of me... taking the glide path instead. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
